Mounting a Vibration Sensor to the Ground at Subfreezing Temperatures

IF 0.3 Q4 GEOCHEMISTRY & GEOPHYSICS

Seismic Instruments Pub Date : 2026-04-01 DOI:10.3103/S0747923925700641

V. V. Yepin, G. N. Gusev, R. V. Tsvetkov, A. P. Shestakov

引用次数: 0

Abstract

A series of experiments was conducted to measure ground vibrations from impact loads under subzero temperatures using sensors attached to the ground in various ways. The signals were compared based on amplitude and frequency parameters using correlation analysis. The analysis of the results made it possible to estimate the ranges of amplitudes and frequencies of the vertical and horizontal components of vibration signals for each type of sensor mounting. These results make it possible to organize a series of vibration measurements in field and construction site conditions during the winter period in an optimal way.

Abstract Image

查看原文本刊更多论文

在冰点以下的温度下安装振动传感器

为了测量在零下温度下由冲击载荷引起的地面振动，研究人员进行了一系列实验，使用了不同方式连接在地面上的传感器。基于幅值和频率参数，采用相关分析对信号进行比较。通过对结果的分析，可以估计出每种类型的传感器安装的振动信号的垂直和水平分量的幅度和频率范围。这些结果使得在冬季以最佳方式组织一系列现场和施工现场条件下的振动测量成为可能。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Seismic Instruments GEOCHEMISTRY & GEOPHYSICS-

自引率

44.40%

发文量

期刊介绍： Seismic Instruments is a journal devoted to the description of geophysical instruments used in seismic research. In addition to covering the actual instruments for registering seismic waves, substantial room is devoted to solving instrumental-methodological problems of geophysical monitoring, applying various methods that are used to search for earthquake precursors, to studying earthquake nucleation processes and to monitoring natural and technogenous processes. The description of the construction, working elements, and technical characteristics of the instruments, as well as some results of implementation of the instruments and interpretation of the results are given. Attention is paid to seismic monitoring data and earthquake catalog quality Analysis.