Strong and tough polyvinyl alcohol hydrogels with high intrinsic thermal conductivity

Abstract

Although polyvinyl alcohol (PVA) hydrogels display huge potential in tissue engineering, flexible and wearable electronic devices and soft robotics, their low intrinsic thermal conductivity and weak mechanical properties severely limit their wider applications in these areas. Herein, a Hofmeister effect-assisted “directional freezing-stretching” tactic is employed for simultaneously enhancing the intrinsic thermal conduction and mechanical properties of PVA hydrogels. The hydrogels are obtained through directional freezing followed by salting-out treatment and subsequent mechanical stretching and salting-out (DFS). The DFS PVA hydrogel with 15 wt% of PVA and a stretching ratio of 4 (DFS4) exhibits the highest thermal conductivity of 1.25 W/(m·K), which is 2.4 and 2.8 times that of PVA hydrogel prepared through frozen-thawed (FT) [0.52 W/(m·K)] and frozen-salted out (FS) [0.45 W/(m·K)] methods, respectively. The DFS4 PVA hydrogel also possesses greatly improved mechanical performances, exhibiting an elongation at break of 163.1%. In addition, the tensile strength, toughness, and elastic modulus of DFS4 PVA hydrogel significantly increase to 27.1 MPa, 25.3 MJ·m-3, and 21.5 MPa from 0.4 MPa, 0.32 MJ·m-3, and 0.07 MPa for FT PVA hydrogels, respectively. It is elucidated that the salting-out effect generates hydrophobic and crystalline regions, while directional freezing and stretching enhance the chain orientation in the DFS strategy. These effects synergistically contribute to the improvement of thermal conductivity and mechanical properties of PVA hydrogels.