Correction to: Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools

IF 2.3 4区材料科学 Q2 MATERIALS SCIENCE, CERAMICS

International Journal of Applied Ceramic Technology Pub Date : 2025-05-09 DOI:10.1111/ijac.15169

{"title":"Correction to: Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools","authors":"","doi":"10.1111/ijac.15169","DOIUrl":null,"url":null,"abstract":"Santos JA, Santos MF, Moreira MH, Angélico RA, Pandolfelli VC. Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools. Int J Appl Ceram Technol. 2025. https://doi.org/10.1111/ijac.14928A careful analysis of the figures showed an inconsistency between the configurations labeling and the figure illustrating them. In the published article listed above, the following corrections should be made.Figure 2 shows Configuration A is without insulation and Configuration B is with insulation, in keeping with the designations in subsequent figures.Further, in Figures 4, 6, 8, and 10, correct the line types used in the legend, expanding to a single legend with all conditions.The same legend clarity improvement was done in Figure 9, detailing the different conditions in a single legend.In Figure 12, we have only adjusted the color of the lines to green shades, since the results were for Configuration B (c-free working lining with insulation), defined as green in all other figures. The legend was also unified for all cases (solid and dashed lines).","PeriodicalId":13903,"journal":{"name":"International Journal of Applied Ceramic Technology","volume":"22 6","pages":""},"PeriodicalIF":2.3000,"publicationDate":"2025-05-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ceramics.onlinelibrary.wiley.com/doi/epdf/10.1111/ijac.15169","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Applied Ceramic Technology","FirstCategoryId":"88","ListUrlMain":"https://ceramics.onlinelibrary.wiley.com/doi/10.1111/ijac.15169","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}

引用次数: 0

Abstract

Santos JA, Santos MF, Moreira MH, Angélico RA, Pandolfelli VC. Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools. Int J Appl Ceram Technol. 2025. https://doi.org/10.1111/ijac.14928

A careful analysis of the figures showed an inconsistency between the configurations labeling and the figure illustrating them. In the published article listed above, the following corrections should be made.

Figure 2 shows Configuration A is without insulation and Configuration B is with insulation, in keeping with the designations in subsequent figures.

Further, in Figures 4, 6, 8, and 10, correct the line types used in the legend, expanding to a single legend with all conditions.

The same legend clarity improvement was done in Figure 9, detailing the different conditions in a single legend.

In Figure 12, we have only adjusted the color of the lines to green shades, since the results were for Configuration B (c-free working lining with insulation), defined as green in all other figures. The legend was also unified for all cases (solid and dashed lines).

Abstract Image

查看原文本刊更多论文

修正：利用开源有限元工具对钢包耐火材料衬里设计进行节能评估

Santos JA, Santos MF, Moreira MH, angsamiclo RA, Pandolfelli VC。基于开源有限元工具的钢包耐火材料衬里节能设计评价。国际苹果陶瓷科技公司，2025。https://doi.org/10.1111/ijac.14928A仔细分析这些图形，发现构型标注和说明它们的图形之间不一致。在上面列出的已发表的文章中，应作出以下更正。如图2所示，配置A不带绝缘，配置B带绝缘，如图2所示。此外，在图4、6、8和10中，更正图例中使用的行类型，将其扩展为包含所有条件的单个图例。在图9中完成了相同的图例清晰度改进，在单个图例中详细说明了不同的条件。在图12中，我们只将线条的颜色调整为绿色阴影，因为结果是配置B（无c的绝缘工作衬里），在所有其他图中定义为绿色。所有情况下的图例也是统一的（实线和虚线）。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Applied Ceramic Technology 工程技术-材料科学：硅酸盐

CiteScore

3.90

自引率

9.50%

发文量

280

审稿时长

4.5 months

期刊介绍： The International Journal of Applied Ceramic Technology publishes cutting edge applied research and development work focused on commercialization of engineered ceramics, products and processes. The publication also explores the barriers to commercialization, design and testing, environmental health issues, international standardization activities, databases, and cost models. Designed to get high quality information to end-users quickly, the peer process is led by an editorial board of experts from industry, government, and universities. Each issue focuses on a high-interest, high-impact topic plus includes a range of papers detailing applications of ceramics. Papers on all aspects of applied ceramics are welcome including those in the following areas: Nanotechnology applications; Ceramic Armor; Ceramic and Technology for Energy Applications (e.g., Fuel Cells, Batteries, Solar, Thermoelectric, and HT Superconductors); Ceramic Matrix Composites; Functional Materials; Thermal and Environmental Barrier Coatings; Bioceramic Applications; Green Manufacturing; Ceramic Processing; Glass Technology; Fiber optics; Ceramics in Environmental Applications; Ceramics in Electronic, Photonic and Magnetic Applications;