Impact Factors on Oven-Dry Density Measurements of Wood.

Abstract

Wood density is a key property since it affects almost every other property of wood such as its elasto-mechanical, acoustic, thermal, or electrical properties. Hence, it is essential to determine wood density for the interpretation of any other property test. Density measurements are usually carried out gravimetrically by measuring the wood specimens' dimensions and taking their weight. In order to be independent of moisture, wood density is measured at an absolute dry state. However, depending on which wood properties shall be measured after the oven-dry density is determined, heating the wood up to 103 °C can be problematic because the volatile components of the wood can evaporate. For this reason, the drying conditions (temperature in °C (60, 80, 103 °C)), duration in h (8, 16, 24, 48 h)) required to achieve an absolute dry state inside wood specimens-being obligatory for the analysis of various physical, mechanical, or even biological properties-were examined for different softwood and hardwood species. Basically, oven-dry measurements (i.e., 48 h at 103 °C) themselves contained a significant error, which was considered to be the result of deviations in the handling of the specimens and the scales used. Using temperatures below 103 °C was critical for the determination of absolute dry mass and dimensions. Wood specimens with a high content of volatile ingredients led to an apparently increased residual MC (e.g., shown for Scots pine heartwood), thus volatile ingredients were considered an additional source of error during oven-dry measurements.