Phosphogypsum composite cement-based permeable bricks: optimization of mix design, performance evaluation, and environmental impact

IF 4.9 3区 工程技术 Q1 ENGINEERING, CIVIL
Lin Yu, Chao-qiang Wang, Cheng-kui Liu
{"title":"Phosphogypsum composite cement-based permeable bricks: optimization of mix design, performance evaluation, and environmental impact","authors":"Lin Yu,&nbsp;Chao-qiang Wang,&nbsp;Cheng-kui Liu","doi":"10.1007/s43452-025-01251-1","DOIUrl":null,"url":null,"abstract":"<div><p>Phosphogypsum (PG) is produced in large quantities, and its main resource utilization is in the construction sector. This study investigates the feasibility of using PG to manufacture phosphogypsum composite cement-based permeable bricks (PGCPB), focusing on the effects of aggregate size distribution, water-to-binder ratio, and slag powder (SP) content on their mechanical and durability properties and assesses the potential risks related to heavy metal content in PGCPB. The results indicate that the highest 3-day compressive strength of PGCPB is 21.1 MPa at a water-cement ratio of 0.26. The maximum 3-day compressive strength of 25.78 MPa is achieved when the fine-to-coarse aggregate ratio is 3:2. At 14 days, SEM observations reveal that incorporating 20% SP leads to an optimal crystalline microstructure and a denser matrix, corresponding to flexural and compressive strengths of 4.47 MPa and 15.25 MPa, respectively. The 14-day flexural and compressive strengths of the cementing material are 4.47 MPa and 15.25 MPa, respectively, when the SP content is 20%. With an increase in PG proportion, the 28-day compressive strength of PGCPB declines, the water permeability coefficient first rises and then falls, and its frost resistance progressively deteriorates. When PG content is 20–30%, PGCPB meets the JC/T 945–2005 permeability standard and reduces carbon emissions by 22.91% compared to conventional cement-based bricks. Environmental risk assessments confirm that PGCPB poses no risk to either soil ecology or human health, making it a safe and eco-friendly material for pavement applications.</p></div>","PeriodicalId":55474,"journal":{"name":"Archives of Civil and Mechanical Engineering","volume":"25 4","pages":""},"PeriodicalIF":4.9000,"publicationDate":"2025-06-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Archives of Civil and Mechanical Engineering","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s43452-025-01251-1","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0

Abstract

Phosphogypsum (PG) is produced in large quantities, and its main resource utilization is in the construction sector. This study investigates the feasibility of using PG to manufacture phosphogypsum composite cement-based permeable bricks (PGCPB), focusing on the effects of aggregate size distribution, water-to-binder ratio, and slag powder (SP) content on their mechanical and durability properties and assesses the potential risks related to heavy metal content in PGCPB. The results indicate that the highest 3-day compressive strength of PGCPB is 21.1 MPa at a water-cement ratio of 0.26. The maximum 3-day compressive strength of 25.78 MPa is achieved when the fine-to-coarse aggregate ratio is 3:2. At 14 days, SEM observations reveal that incorporating 20% SP leads to an optimal crystalline microstructure and a denser matrix, corresponding to flexural and compressive strengths of 4.47 MPa and 15.25 MPa, respectively. The 14-day flexural and compressive strengths of the cementing material are 4.47 MPa and 15.25 MPa, respectively, when the SP content is 20%. With an increase in PG proportion, the 28-day compressive strength of PGCPB declines, the water permeability coefficient first rises and then falls, and its frost resistance progressively deteriorates. When PG content is 20–30%, PGCPB meets the JC/T 945–2005 permeability standard and reduces carbon emissions by 22.91% compared to conventional cement-based bricks. Environmental risk assessments confirm that PGCPB poses no risk to either soil ecology or human health, making it a safe and eco-friendly material for pavement applications.

磷石膏复合水泥基透水砖:配合比设计优化、性能评价及环境影响
磷石膏(PG)大量生产,其主要资源利用是在建筑领域。本研究探讨了用PG制备磷石膏复合水泥基透水砖(PGCPB)的可行性,重点研究了骨料粒度分布、水胶比和渣粉(SP)含量对其力学性能和耐久性的影响,并评估了PGCPB中重金属含量的潜在风险。结果表明,当水灰比为0.26时,PGCPB最高3 d抗压强度为21.1 MPa;细粗比为3:2时,3天抗压强度最大可达25.78 MPa。在第14天,SEM观察显示,加入20% SP可以获得最佳的晶体微观结构和更致密的基体,对应的抗折强度和抗压强度分别为4.47 MPa和15.25 MPa。当SP含量为20%时,胶凝材料的14天抗折强度为4.47 MPa,抗压强度为15.25 MPa。随着PG掺量的增加,PGCPB的28天抗压强度下降,透水系数先上升后下降,抗冻性逐渐恶化。PG含量为20 ~ 30%时,PGCPB达到JC/T 945-2005渗透性标准,与常规水泥基砖相比,碳排放量减少22.91%。环境风险评估证实,PGCPB不会对土壤生态或人类健康构成风险,使其成为路面应用的安全环保材料。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Archives of Civil and Mechanical Engineering
Archives of Civil and Mechanical Engineering 工程技术-材料科学:综合
CiteScore
6.80
自引率
9.10%
发文量
201
审稿时长
4 months
期刊介绍: Archives of Civil and Mechanical Engineering (ACME) publishes both theoretical and experimental original research articles which explore or exploit new ideas and techniques in three main areas: structural engineering, mechanics of materials and materials science. The aim of the journal is to advance science related to structural engineering focusing on structures, machines and mechanical systems. The journal also promotes advancement in the area of mechanics of materials, by publishing most recent findings in elasticity, plasticity, rheology, fatigue and fracture mechanics. The third area the journal is concentrating on is materials science, with emphasis on metals, composites, etc., their structures and properties as well as methods of evaluation. In addition to research papers, the Editorial Board welcomes state-of-the-art reviews on specialized topics. All such articles have to be sent to the Editor-in-Chief before submission for pre-submission review process. Only articles approved by the Editor-in-Chief in pre-submission process can be submitted to the journal for further processing. Approval in pre-submission stage doesn''t guarantee acceptance for publication as all papers are subject to a regular referee procedure.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书