Enhancing proton transport in cross-linked poly(vinyl alcohol)/sulfosuccinic acid membranes by adding TEMPO-oxidized lignocellulose nanofibrils

IF 4.8 2区 工程技术 Q1 MATERIALS SCIENCE, PAPER & WOOD
Gregory Albornoz-Palma, Sergio Henríquez-Gallegos, Miguel Pereira, A. Ribes-Greus
{"title":"Enhancing proton transport in cross-linked poly(vinyl alcohol)/sulfosuccinic acid membranes by adding TEMPO-oxidized lignocellulose nanofibrils","authors":"Gregory Albornoz-Palma,&nbsp;Sergio Henríquez-Gallegos,&nbsp;Miguel Pereira,&nbsp;A. Ribes-Greus","doi":"10.1007/s10570-025-06691-9","DOIUrl":null,"url":null,"abstract":"<div><p>The membranes based on poly(vinyl alcohol) (PVA) and sulfosuccinic acid (SSA) are an interesting alternative for use in proton exchange membrane fuel cells (PEMFC), due to their low cost. Nevertheless, it is necessary to enhance their electrochemical performance for their use. This research aims to understand the effect of the addition of TOLCNFs with different lignin content on the physicochemical properties of PVA/SSA-based membranes, proton transport, and their performance as electrolytes in a laboratory PEMFC. For this, TEMPO-oxidized lignocellulose nanofibrils (TOLCNFs) were produced from <i>Pinus radiata</i> pulp that was delignified using oxidative treatments. TOLCNFs with a lignin content of 29.7% (TOLCNF-0), 21.8% (TOLCNF-0.75), 16.9% (TOLCNF-2), and 9.7% (TOLCNF-5) were obtained by varying oxidative treatment times. Membranes of PVA, SSA, and 5% (w/w) TOLCNF were prepared. The addition of TOLCNF changed the structure of the PVA/SSA membrane, promoting cross-linking between the fibrils. Furthermore, they increased the water absorption capacity (W) and decreased the swelling (S). The proton transport by diffusion through the membranes was hindered by the addition of the TOLCNFs. Despite that, the TOLCNFs promoted proton conductivity through the membranes, due to the increase in their water absorption capacity, hydrophilicity, cross-linking, and W/S ratio. Notably, the PVA/SSA/TOLCNF-0 and PVA/SSA/TOLCNF-2 membranes exhibited the highest proton conductivity over the entire temperature range studied (40–110 °C). Finally, the incorporation of the TOLCNFs improved the performance of the PVA/SSA membrane as an electrolyte in a laboratory PEMFC, with the TOLCNF-0 proving to be the best filler for the PVA/SSA membrane.</p><h3>Graphical abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":511,"journal":{"name":"Cellulose","volume":"32 13","pages":"7839 - 7859"},"PeriodicalIF":4.8000,"publicationDate":"2025-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Cellulose","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s10570-025-06691-9","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, PAPER & WOOD","Score":null,"Total":0}
引用次数: 0

Abstract

The membranes based on poly(vinyl alcohol) (PVA) and sulfosuccinic acid (SSA) are an interesting alternative for use in proton exchange membrane fuel cells (PEMFC), due to their low cost. Nevertheless, it is necessary to enhance their electrochemical performance for their use. This research aims to understand the effect of the addition of TOLCNFs with different lignin content on the physicochemical properties of PVA/SSA-based membranes, proton transport, and their performance as electrolytes in a laboratory PEMFC. For this, TEMPO-oxidized lignocellulose nanofibrils (TOLCNFs) were produced from Pinus radiata pulp that was delignified using oxidative treatments. TOLCNFs with a lignin content of 29.7% (TOLCNF-0), 21.8% (TOLCNF-0.75), 16.9% (TOLCNF-2), and 9.7% (TOLCNF-5) were obtained by varying oxidative treatment times. Membranes of PVA, SSA, and 5% (w/w) TOLCNF were prepared. The addition of TOLCNF changed the structure of the PVA/SSA membrane, promoting cross-linking between the fibrils. Furthermore, they increased the water absorption capacity (W) and decreased the swelling (S). The proton transport by diffusion through the membranes was hindered by the addition of the TOLCNFs. Despite that, the TOLCNFs promoted proton conductivity through the membranes, due to the increase in their water absorption capacity, hydrophilicity, cross-linking, and W/S ratio. Notably, the PVA/SSA/TOLCNF-0 and PVA/SSA/TOLCNF-2 membranes exhibited the highest proton conductivity over the entire temperature range studied (40–110 °C). Finally, the incorporation of the TOLCNFs improved the performance of the PVA/SSA membrane as an electrolyte in a laboratory PEMFC, with the TOLCNF-0 proving to be the best filler for the PVA/SSA membrane.

Graphical abstract

通过添加tempo氧化木质纤维素纳米原纤维增强交联聚乙烯醇/磺基琥珀酸膜中的质子传输
基于聚乙烯醇(PVA)和磺基琥珀酸(SSA)的膜由于其低成本而成为质子交换膜燃料电池(PEMFC)的一个有趣的替代方案。然而,为了使其得到应用,必须提高其电化学性能。本研究旨在了解添加不同木质素含量的TOLCNFs对PVA/ ssa基膜的物理化学性质、质子传输及其在实验室PEMFC中作为电解质的性能的影响。为此,利用氧化处理去木素化的辐射松纸浆制备了tempo氧化木质纤维素纳米原纤维(TOLCNFs)。通过不同的氧化处理时间,得到木质素含量分别为29.7% (TOLCNF-0)、21.8% (TOLCNF-0.75)、16.9% (TOLCNF-2)和9.7% (TOLCNF-5)的tolcnf。制备了PVA、SSA和5% (w/w) TOLCNF膜。TOLCNF的加入改变了PVA/SSA膜的结构,促进了原纤维之间的交联。此外,它们增加了吸水量(W),降低了溶胀量(S)。质子通过膜的扩散传输被添加的TOLCNFs所阻碍。尽管如此,由于其吸水能力、亲水性、交联性和W/S比的增加,TOLCNFs促进了质子通过膜的导电性。值得注意的是,PVA/SSA/TOLCNF-0和PVA/SSA/TOLCNF-2膜在整个温度范围内(40-110℃)表现出最高的质子导电性。最后,在实验室PEMFC中,tolcnf的掺入提高了PVA/SSA膜作为电解质的性能,其中TOLCNF-0被证明是PVA/SSA膜的最佳填料。图形抽象
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Cellulose
Cellulose 工程技术-材料科学:纺织
CiteScore
10.10
自引率
10.50%
发文量
580
审稿时长
3-8 weeks
期刊介绍: Cellulose is an international journal devoted to the dissemination of research and scientific and technological progress in the field of cellulose and related naturally occurring polymers. The journal is concerned with the pure and applied science of cellulose and related materials, and also with the development of relevant new technologies. This includes the chemistry, biochemistry, physics and materials science of cellulose and its sources, including wood and other biomass resources, and their derivatives. Coverage extends to the conversion of these polymers and resources into manufactured goods, such as pulp, paper, textiles, and manufactured as well natural fibers, and to the chemistry of materials used in their processing. Cellulose publishes review articles, research papers, and technical notes.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信