Archita Hati;Marco Pomponio;Nicholas V. Nardelli;Tanner Grogan;Kyungtae Kim;Dahyeon Lee;Jun Ye;Tara M. Fortier;Andrew Ludlow;Craig W. Nelson
{"title":"Radio Frequency From Optical With Instabilities Below 10-15-Generation and Measurement","authors":"Archita Hati;Marco Pomponio;Nicholas V. Nardelli;Tanner Grogan;Kyungtae Kim;Dahyeon Lee;Jun Ye;Tara M. Fortier;Andrew Ludlow;Craig W. Nelson","doi":"10.1109/OJUFFC.2025.3596866","DOIUrl":null,"url":null,"abstract":"This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of <inline-formula> <tex-math>$\\sigma _{y}({1}~\\text {s})\\lt {10}^{-{15}}$ </tex-math></inline-formula> and low 10-18 level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of <inline-formula> <tex-math>${\\sigma }_{y}({1}~\\text {s})~\\approx ~{4.7}\\times {10}^{-{16}}$ </tex-math></inline-formula> at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of −140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems.","PeriodicalId":73301,"journal":{"name":"IEEE open journal of ultrasonics, ferroelectrics, and frequency control","volume":"5 ","pages":"127-134"},"PeriodicalIF":2.9000,"publicationDate":"2025-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=11121396","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE open journal of ultrasonics, ferroelectrics, and frequency control","FirstCategoryId":"1085","ListUrlMain":"https://ieeexplore.ieee.org/document/11121396/","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
This paper presents a frequency synthesis that achieves exceptional stability by transferring optical signals to the radio frequency (RF) domain at 100 MHz. We describe and characterize two synthesis chains composed of a cryogenic silicon cavity-stabilized laser at 1542 nm and an ultra-low expansion (ULE) glass cavity at 1157 nm, both converted to 10 GHz signals via Ti:Sapphire and Er/Yb:glass optical frequency combs (OFCs). The 10 GHz microwave outputs are further divided down to 100 MHz using a commercial microwave prescaler, which exhibits a residual frequency instability of $\sigma _{y}({1}~\text {s})\lt {10}^{-{15}}$ and low 10-18 level at a few thousand seconds. Measurements are performed using a newly developed custom ultra-low-noise digital measurement system and are compared to the carrier-suppression technique. The new system enables high-sensitivity evaluation across the entire synthesis chain, from the optical and microwave heterodynes as well as the direct RF signals. Results show an absolute instability of ${\sigma }_{y}({1}~\text {s})~\approx ~{4.7}\times {10}^{-{16}}$ at 100 MHz. This represents the first demonstration of such low instability at 100 MHz, corresponding to a phase noise of −140 dBc/Hz at a 1 Hz offset and significantly surpassing earlier systems. These advancements open new opportunities for precision metrology and timing systems.