Jiashuo Zhang, Yong Zheng, Yingliang Zhao, Kai Cui, Peiliang Shen, Chi Sun Poon
{"title":"Utilization of granite sludge in the production of low carbon cement composites after coupled mechanical and CO2 activation (CMCA)","authors":"Jiashuo Zhang, Yong Zheng, Yingliang Zhao, Kai Cui, Peiliang Shen, Chi Sun Poon","doi":"10.1016/j.cemconcomp.2025.106284","DOIUrl":null,"url":null,"abstract":"<div><div>Granite sludge (GS), as an industrial byproduct, has caused serious pollution and waste of resources. To reduce the environmental impact and achieve resource utilization, this study adopted two mechanochemical treatment methods, mechanical activation and coupled mechanical and CO<sub>2</sub> activation (CMCA), to treat GS to prepare a new low-carbon cement. After CMCA treatment, the compressive strength increased significantly in both early and late stages, reaching 5.5 MPa at 1 d and 38.19 MPa at 28 d. After the addition of sodium silicate, the compressive strength reached 5.87 MPa and 39.76 MPa at 1 d and 28 d, respectively. This performance improvement is attributed to synergistic physical and chemical activation. Physically, the treatment refines the particles to the 1–10 μm range and increases the specific surface area, thereby providing a large number of nucleation sites to accelerate early hydration. Chemically, the CMCA process generates highly active metastable calcium carbonate. The metastable calcium carbonate generated has high reactivity, and its significant nucleation effect promotes the overall hydration process. These highly active particle surfaces act as effective chemical nucleation sites, accelerating the formation of C-S-H gel. At the same time, the metastable calcium carbonate also directly participates in the reaction, reacting with the aluminate in the cement to generate additional reinforcing phases such as Mc and Hc. After adding sodium silicate, the generated silica gel has pozzolanic activity, which can not only undergo secondary hydration reaction with CH to generate more C-S-H, but also accelerate the overall hydration reaction and further improve the compressive strength. This method shows broad application prospects in industrial solid waste utilization and low-carbon cement production and has significant environmental benefits and resource utilization potential.</div></div>","PeriodicalId":9865,"journal":{"name":"Cement & concrete composites","volume":"164 ","pages":"Article 106284"},"PeriodicalIF":13.1000,"publicationDate":"2025-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Cement & concrete composites","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S095894652500366X","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
Granite sludge (GS), as an industrial byproduct, has caused serious pollution and waste of resources. To reduce the environmental impact and achieve resource utilization, this study adopted two mechanochemical treatment methods, mechanical activation and coupled mechanical and CO2 activation (CMCA), to treat GS to prepare a new low-carbon cement. After CMCA treatment, the compressive strength increased significantly in both early and late stages, reaching 5.5 MPa at 1 d and 38.19 MPa at 28 d. After the addition of sodium silicate, the compressive strength reached 5.87 MPa and 39.76 MPa at 1 d and 28 d, respectively. This performance improvement is attributed to synergistic physical and chemical activation. Physically, the treatment refines the particles to the 1–10 μm range and increases the specific surface area, thereby providing a large number of nucleation sites to accelerate early hydration. Chemically, the CMCA process generates highly active metastable calcium carbonate. The metastable calcium carbonate generated has high reactivity, and its significant nucleation effect promotes the overall hydration process. These highly active particle surfaces act as effective chemical nucleation sites, accelerating the formation of C-S-H gel. At the same time, the metastable calcium carbonate also directly participates in the reaction, reacting with the aluminate in the cement to generate additional reinforcing phases such as Mc and Hc. After adding sodium silicate, the generated silica gel has pozzolanic activity, which can not only undergo secondary hydration reaction with CH to generate more C-S-H, but also accelerate the overall hydration reaction and further improve the compressive strength. This method shows broad application prospects in industrial solid waste utilization and low-carbon cement production and has significant environmental benefits and resource utilization potential.
期刊介绍:
Cement & concrete composites focuses on advancements in cement-concrete composite technology and the production, use, and performance of cement-based construction materials. It covers a wide range of materials, including fiber-reinforced composites, polymer composites, ferrocement, and those incorporating special aggregates or waste materials. Major themes include microstructure, material properties, testing, durability, mechanics, modeling, design, fabrication, and practical applications. The journal welcomes papers on structural behavior, field studies, repair and maintenance, serviceability, and sustainability. It aims to enhance understanding, provide a platform for unconventional materials, promote low-cost energy-saving materials, and bridge the gap between materials science, engineering, and construction. Special issues on emerging topics are also published to encourage collaboration between materials scientists, engineers, designers, and fabricators.