Dehydration of highly viscous polyol (1,2,4-butanetriol) using microwave-induced sweep gas membrane distillation (MIMD) on nanocarbon-immobilized membranes
Mitun Chandra Bhoumick, Benjamin G. Harvey, Derek D. Zhang and Somenath Mitra
{"title":"Dehydration of highly viscous polyol (1,2,4-butanetriol) using microwave-induced sweep gas membrane distillation (MIMD) on nanocarbon-immobilized membranes","authors":"Mitun Chandra Bhoumick, Benjamin G. Harvey, Derek D. Zhang and Somenath Mitra","doi":"10.1039/D5SE00319A","DOIUrl":null,"url":null,"abstract":"<p >A challenge facing the synthesis of bioderived platform chemicals such as polyols and polyacids <em>via</em> fermentation processes is their separation from dilute aqueous streams. This study presents microwave-induced membrane distillation (MIMD) as a method for concentrating viscous 1,2,4-butanetriol (BT) at concentrations that can be sourced from fermentation broth. MIMD and sweep gas membrane distillation (SGMD) processes were employed to concentrate BT feed solutions utilizing nanocarbon-based membranes, namely the carbon nanotube immobilized membrane (CNIM) or the graphene oxide immobilized membrane (GOIM). Microwave heating (MWH) was utilized to elevate the temperature of the feed system and was found to be superior to conventional heating (CH) in terms of flux, mass transfer coefficients and thermal efficiency. Our findings reveal that GOIMs exhibited an 11.5% higher dehydration rate compared to CNIMs. Initial water flux reached 14.1 kg m<small><sup>−2</sup></small> h<small><sup>−1</sup></small>, albeit this value decreased thereafter as the concentration of BT increased, thus limiting mass transfer coefficients due to increased viscosity, which reached 11.41 mPa s at 90 wt% and 80 °C. Overall, MWH substantially alleviated this issue, leading to a flux as high as 15.7 kg m<small><sup>−2</sup></small> h<small><sup>−1</sup></small> and a 35% improvement in mass transfer coefficients over CH. The overall thermal efficiency of BT concentration reached 74.5% for GOIM-based MIMD with a specific energy consumption (SEC) of 263 kW h m<small><sup>−3</sup></small>, which showed a 6.5% reduction compared to CH.</p>","PeriodicalId":104,"journal":{"name":"Sustainable Energy & Fuels","volume":" 15","pages":" 4068-4076"},"PeriodicalIF":5.0000,"publicationDate":"2025-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sustainable Energy & Fuels","FirstCategoryId":"88","ListUrlMain":"https://pubs.rsc.org/en/content/articlelanding/2025/se/d5se00319a","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0
Abstract
A challenge facing the synthesis of bioderived platform chemicals such as polyols and polyacids via fermentation processes is their separation from dilute aqueous streams. This study presents microwave-induced membrane distillation (MIMD) as a method for concentrating viscous 1,2,4-butanetriol (BT) at concentrations that can be sourced from fermentation broth. MIMD and sweep gas membrane distillation (SGMD) processes were employed to concentrate BT feed solutions utilizing nanocarbon-based membranes, namely the carbon nanotube immobilized membrane (CNIM) or the graphene oxide immobilized membrane (GOIM). Microwave heating (MWH) was utilized to elevate the temperature of the feed system and was found to be superior to conventional heating (CH) in terms of flux, mass transfer coefficients and thermal efficiency. Our findings reveal that GOIMs exhibited an 11.5% higher dehydration rate compared to CNIMs. Initial water flux reached 14.1 kg m−2 h−1, albeit this value decreased thereafter as the concentration of BT increased, thus limiting mass transfer coefficients due to increased viscosity, which reached 11.41 mPa s at 90 wt% and 80 °C. Overall, MWH substantially alleviated this issue, leading to a flux as high as 15.7 kg m−2 h−1 and a 35% improvement in mass transfer coefficients over CH. The overall thermal efficiency of BT concentration reached 74.5% for GOIM-based MIMD with a specific energy consumption (SEC) of 263 kW h m−3, which showed a 6.5% reduction compared to CH.
通过发酵过程合成生物衍生平台化学品(如多元醇和多元酸)面临的一个挑战是将它们从稀释的水溶液中分离出来。本研究提出微波诱导膜蒸馏(MIMD)作为一种浓缩粘性1,2,4-丁三醇(BT)的方法,其浓度可以从发酵液中获得。利用纳米碳基膜,即碳纳米管固定化膜(CNIM)或氧化石墨烯固定化膜(GOIM),采用MIMD和扫描气膜蒸馏(SGMD)工艺浓缩BT进料溶液。利用微波加热(MWH)提高进料系统温度,在通量、传质系数和热效率方面优于常规加热(CH)。我们的研究结果表明,GOIMs比CNIMs脱水率高11.5%。初始水通量达到14.1 kg m−2 h−1,尽管该值随后随着BT浓度的增加而下降,从而限制了由于粘度增加而导致的传质系数,在90 wt%和80°C下,传质系数达到11.41 mPa s。总的来说,MWH大大缓解了这一问题,导致通量高达15.7 kg m−2 h−1,传质系数比CH提高了35%。基于goim的MIMD的BT浓度总体热效率达到74.5%,比能耗(SEC)为263 kW h m−3,比CH降低了6.5%。
期刊介绍:
Sustainable Energy & Fuels will publish research that contributes to the development of sustainable energy technologies with a particular emphasis on new and next-generation technologies.