Dynamic Observer-Based Multi-AUV Enclosing Control for Target Without Velocity Measurement

IF 5.6 2区 工程技术 Q1 ENGINEERING, ELECTRICAL & ELECTRONIC
Zheping Yan;Yuyang Yu;Wen Xing;Yan Shi
{"title":"Dynamic Observer-Based Multi-AUV Enclosing Control for Target Without Velocity Measurement","authors":"Zheping Yan;Yuyang Yu;Wen Xing;Yan Shi","doi":"10.1109/TIM.2025.3575973","DOIUrl":null,"url":null,"abstract":"This article focuses on the problem of enclosing control for moving targets using multiple underactuated autonomous underwater vehicles (AUVs). For the target with unknown velocity measurement, a dynamic observer is designed to provide estimated positions and velocities of the target to AUVs and possess the capability to adapt to dynamic changes in interaction topology and interruptions in link connectivity. Leveraging a self-organized scheme, a kinematic controller based on the dynamic observer is developed, enabling the AUVs to rearrange their positions in the formation, thereby increasing the flexibility of their collaboration. To compensate for the impacts of external interference, an extended state observer (ESO) is employed to estimate the aggregated disturbances, which encompass uncertain dynamics and perturbations. Then, an ESO-based dynamic controller is derived using the backstepping method to ensure that the actual velocities of AUVs align with the commanded velocities generated by the kinematic controller. Sufficient conditions for stability and numerical examples are finally provided to demonstrate the effectiveness and advantages of the theoretical results.","PeriodicalId":13341,"journal":{"name":"IEEE Transactions on Instrumentation and Measurement","volume":"74 ","pages":"1-14"},"PeriodicalIF":5.6000,"publicationDate":"2025-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Transactions on Instrumentation and Measurement","FirstCategoryId":"5","ListUrlMain":"https://ieeexplore.ieee.org/document/11021550/","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

This article focuses on the problem of enclosing control for moving targets using multiple underactuated autonomous underwater vehicles (AUVs). For the target with unknown velocity measurement, a dynamic observer is designed to provide estimated positions and velocities of the target to AUVs and possess the capability to adapt to dynamic changes in interaction topology and interruptions in link connectivity. Leveraging a self-organized scheme, a kinematic controller based on the dynamic observer is developed, enabling the AUVs to rearrange their positions in the formation, thereby increasing the flexibility of their collaboration. To compensate for the impacts of external interference, an extended state observer (ESO) is employed to estimate the aggregated disturbances, which encompass uncertain dynamics and perturbations. Then, an ESO-based dynamic controller is derived using the backstepping method to ensure that the actual velocities of AUVs align with the commanded velocities generated by the kinematic controller. Sufficient conditions for stability and numerical examples are finally provided to demonstrate the effectiveness and advantages of the theoretical results.
基于动态观测器的多auv无测速目标封闭控制
研究了多欠驱动自主水下航行器(auv)运动目标的封闭控制问题。对于测速未知的目标,设计了动态观测器,为水下机器人提供目标的估计位置和速度,并具有适应交互拓扑动态变化和链路连接中断的能力。利用自组织方案,开发了基于动态观测器的运动学控制器,使水下机器人能够重新安排其在编队中的位置,从而增加了其协作的灵活性。为了补偿外部干扰的影响,采用扩展状态观测器(ESO)来估计包含不确定动力学和摄动的聚合扰动。然后,利用反推法推导了基于eso的动态控制器,以确保auv的实际速度与运动控制器生成的指令速度一致。最后给出了稳定性的充分条件和数值算例,证明了理论结果的有效性和优越性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
IEEE Transactions on Instrumentation and Measurement
IEEE Transactions on Instrumentation and Measurement 工程技术-工程:电子与电气
CiteScore
9.00
自引率
23.20%
发文量
1294
审稿时长
3.9 months
期刊介绍: Papers are sought that address innovative solutions to the development and use of electrical and electronic instruments and equipment to measure, monitor and/or record physical phenomena for the purpose of advancing measurement science, methods, functionality and applications. The scope of these papers may encompass: (1) theory, methodology, and practice of measurement; (2) design, development and evaluation of instrumentation and measurement systems and components used in generating, acquiring, conditioning and processing signals; (3) analysis, representation, display, and preservation of the information obtained from a set of measurements; and (4) scientific and technical support to establishment and maintenance of technical standards in the field of Instrumentation and Measurement.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信