Synthesis and characterization for structural and optical properties of FASnI2Br for perovskite solar cell applications

IF 2.7 4区材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials Letters Pub Date : 2025-06-11 DOI:10.1016/j.matlet.2025.138919

Rohn Odhiambo Cephas , Duke Ateyh Oeba , Jared Ombiro Gwaro

引用次数: 0

Abstract

Solar cells being a clean and renewable energy source, help achieve sustainable development goal number 7; Affordable and clean energy. Perovskite solar cells have attracted the attention of researchers due to their exemplary high-power conversion efficiencies of above 25 %. An example of a material that has been used as a perovskite active layer is FASnI₃.For tunability of the band gap and enhancing stability, this can be doped with halide materials. In this study, FASnI₂Br was synthesized, followed by structural characterization using XRD and optical characterization using UV–vis. From the fabricated devices, FF of 50.44 %, PCE of 3.57 %, Jsc of 12.46 mA/cm², Voc of 0.44 V and MPP of 3.57 mW/cm² were obtained. This was a good indication for an active material for perovskite solar cells.

查看原文本刊更多论文

钙钛矿太阳能电池用FASnI2Br的合成及结构和光学性能表征

太阳能电池是一种清洁的可再生能源，有助于实现可持续发展目标7；可负担的清洁能源。钙钛矿太阳能电池因其25%以上的高功率转换效率而引起了研究人员的注意。作为钙钛矿活性层的材料的一个例子是FASnI3。为了提高带隙的可调性和稳定性，可以在带隙中掺杂卤化物材料。本研究首先合成了FASnI2Br，然后用XRD进行了结构表征，用UV-vis进行了光学表征。所制器件的FF为50.44%，PCE为3.57%，Jsc为12.46 mA/cm2， Voc为0.44 V， MPP为3.57 mW/cm2。这是钙钛矿太阳能电池活性材料的一个很好的指示。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Materials Letters 工程技术-材料科学：综合

CiteScore

5.60

自引率

3.30%

发文量

1948

审稿时长

50 days

期刊介绍： Materials Letters has an open access mirror journal Materials Letters: X, sharing the same aims and scope, editorial team, submission system and rigorous peer review. Materials Letters is dedicated to publishing novel, cutting edge reports of broad interest to the materials community. The journal provides a forum for materials scientists and engineers, physicists, and chemists to rapidly communicate on the most important topics in the field of materials. Contributions include, but are not limited to, a variety of topics such as: • Materials - Metals and alloys, amorphous solids, ceramics, composites, polymers, semiconductors • Applications - Structural, opto-electronic, magnetic, medical, MEMS, sensors, smart • Characterization - Analytical, microscopy, scanning probes, nanoscopic, optical, electrical, magnetic, acoustic, spectroscopic, diffraction • Novel Materials - Micro and nanostructures (nanowires, nanotubes, nanoparticles), nanocomposites, thin films, superlattices, quantum dots. • Processing - Crystal growth, thin film processing, sol-gel processing, mechanical processing, assembly, nanocrystalline processing. • Properties - Mechanical, magnetic, optical, electrical, ferroelectric, thermal, interfacial, transport, thermodynamic • Synthesis - Quenching, solid state, solidification, solution synthesis, vapor deposition, high pressure, explosive