An innovative boundary surface model integrating strain rate effect and its application in assessing sliding resistance of a movable subsea mudmat

Abstract

The soil strength of soft clay is influenced by strain rate effect. Models considering strain rate effect always ignore the impact of loading rate on pore pressure and have poor applicability to 3D engineering problems. Based on the classic inelastic core boundary surface model, a logarithmic rate function representing the strain rate effect of soft soil was introduced to the hardening law. A new parameter H was added to adjust the plastic modulus while another new parameter μ is introduced to account for the strain rate effect. A rate-effect boundary surface constitutive model suitable for saturated clay was subsequently proposed. Combined with the implicit integral numerical algorithm and stress-permeability coupling analysis, the innovative model was implemented in the finite element software and validated by comparing with the results of triaxial tests. By analysing the rate-effect of 11 types of soft soil, a formula to calculate the rate parameter was derived. The developed model was used to calculate the undrained vertical bearing capacity and sliding resistance of a movable subsea mudmat. The mudmat frictional coefficient from soil undrained to partial drained and finally undrained state was obtained and compared with those from the Modified Cam-Clay model. Identical results were obtained without considering the rate effect. When considering the strain rate effect on the improvement of soil strength, the friction resistance coefficient initially decreases and then increases with the decrease of the sliding speed, eventually stabilising after reaching the limit value. The rate-effect on the friction resistance coefficient is most prominent under undrained conditions with high sliding speeds. The soil strain rate effect is suggested to be considered in the design of the subsea mudmat avoid underestimating the friction resistance.