Laser-Directed Energy-Deposited Ti-6Al-4V: The Anisotropy of Its Microstructure, Mechanical Properties, and Fracture Behavior.

Abstract

Ti-6Al-4V (Ti64) is widely used in the additive manufacturing (AM) industry for its superior mechanical properties; however, severe anisotropy is inevitable. In this work, a Ti64 sample fabricated using laser-directed energy deposition is used for fundamental investigations into the anisotropy of its microstructure, mechanical properties, and fracture behaviors. The microstructure of martensite α and prior β-Ti grains are characterized in both the XOY and XOZ planes. The tensile/compressive properties and microhardness along the building direction (BD) and scanning direction (SD) are tested, and it is found that the sample along the SD has better comprehensive mechanical properties. Due to grain boundary α (GB-α), different fracture behaviors and crack propagation paths are found along the BD and SD. When tensile force is parallel to the growth orientation of GB-α, a much higher density of microcracks caused by fractured GB-α is found to contribute to a prolonged elongation and the weakening of strength. While stretching along the SD, the cracks would propagate along the GB-α easily and straightly, which might lead to lower elongation.