Effect of Nitriding on Structure and Properties of 09Mn2Si Steel with Zinc Coatings

IF 0.58 Q4 Materials Science

Polymer Science, Series D Pub Date : 2025-05-22 DOI:10.1134/S1995421224702162

L. G. Petrova, G. Yu. Timofeeva, A. V. Kosachev

引用次数: 0

Abstract

The article discusses surface modification of 09Mn2Si steel consisting of zinc coating followed by nitriding. Metallographic studies reveal the structure of a diffusion layer under zinc coating that consists of a transition area and an internal nitriding area. A positive effect of nitriding on coating adhesion to a steel substrate is demonstrated. An increase in the wear resistance of the nitrided coating and corrosion resistance in a salt medium is observed.

查看原文本刊更多论文

氮化对含锌09Mn2Si钢组织和性能的影响

本文讨论了采用涂锌后再渗氮的方法对09Mn2Si钢进行表面改性。金相研究揭示了锌涂层下扩散层的结构，该扩散层由过渡区和内部氮化区组成。氮化对涂层与钢基体的附着力有积极的影响。观察到氮化涂层的耐磨性和耐盐介质腐蚀性能的提高。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Polymer Science, Series D Materials Science-Polymers and Plastics

CiteScore

0.80

自引率

0.00%

发文量

期刊介绍： Polymer Science, Series D publishes useful description of engineering developments that are related to the preparation and application of glues, compounds, sealing materials, and binding agents, articles on the adhesion theory, prediction of the strength of adhesive joints, methods for the control of their properties, synthesis, and methods of structural modeling of glued joints and constructions, original articles with new scientific results, analytical reviews of the modern state in the field.