Development of Epoxy-Based Binders and Triethylenetetramine (TETA) Modified with Thermoplastic Polyurethane

IF 0.58 Q4 Materials Science

Polymer Science, Series D Pub Date : 2025-05-22 DOI:10.1134/S1995421224701752

D. A. Shapovalova, S. V. Borisov, M. A. Vaniev, I. A. Novakov

引用次数: 0

Abstract

For the first time, binders have been developed for creating composite materials by contact molding, including ED-20 epoxy resin and triethylenetetramine modified with thermoplastic polyurethane. For cured binders, compared to an unmodified sample, the abrasion resistance index increases by 2.3 arb. units. Glass-reinforced plastics manufactured using the developed binders are characterized by increased values of bending stress at maximum load and elastic modulus up to 522 MPa and 16.0 GPa, respectively.

查看原文本刊更多论文

环氧基粘结剂及热塑性聚氨酯改性三乙基四胺的研制

首次开发了用于通过接触模塑制造复合材料的粘合剂，包括ED-20环氧树脂和热塑性聚氨酯改性的三乙烯四胺。对于固化的粘结剂，与未改性的样品相比，耐磨性指数增加了2.3 arb。单位。使用该粘合剂制造的玻璃增强塑料具有最大载荷下弯曲应力和弹性模量分别增加到522 MPa和16.0 GPa的特点。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Polymer Science, Series D Materials Science-Polymers and Plastics

CiteScore

0.80

自引率

0.00%

发文量

期刊介绍： Polymer Science, Series D publishes useful description of engineering developments that are related to the preparation and application of glues, compounds, sealing materials, and binding agents, articles on the adhesion theory, prediction of the strength of adhesive joints, methods for the control of their properties, synthesis, and methods of structural modeling of glued joints and constructions, original articles with new scientific results, analytical reviews of the modern state in the field.