Multiscale investigation on the cement-lime modified red mudstone as fill material for high-speed railway

IF 4.2 2区 工程技术 Q3 ENGINEERING, ENVIRONMENTAL
Jiahang Xu, Xianfeng Liu, Shengyang Yuan, Jie Ma, Dariusz Wanatowski, Ana Heitor, Ren Hu, Feng Chen
{"title":"Multiscale investigation on the cement-lime modified red mudstone as fill material for high-speed railway","authors":"Jiahang Xu,&nbsp;Xianfeng Liu,&nbsp;Shengyang Yuan,&nbsp;Jie Ma,&nbsp;Dariusz Wanatowski,&nbsp;Ana Heitor,&nbsp;Ren Hu,&nbsp;Feng Chen","doi":"10.1007/s10064-025-04337-5","DOIUrl":null,"url":null,"abstract":"<div><p>The construction of high-speed railway in Southwest China must traverse extensive regions of red mudstone. However, due to the humid subtropical monsoon climate in Southwest region, the red mudstone is often exposed to a high-water content or saturated state for extended time, and the poor mechanical properties under such condition cannot satisfy the requirements of high-speed railway subgrade. This paper proposes the use of lime and cement to improve the saturated unconfined compression strength (UCS) of the red mudstone fill material. Comprehensive tests, including UCS tests and scanning electron microscopy, were conducted on cement-lime modified red mudstone. Results show that lime stabilisation can significantly enhance the UCS and elastic modulus with the increase of dry density and modifier content. For the specimens with 4% lime and 6% cement, both peak strength and elastic modulus of the modified samples are more than 10 times higher than those of the untreated ones. The modulus exhibits nonlinear degradation with the development of shear stress, but the degradation can be improved with the increase of dry density and modifier content. At 60% of initial tangent modulus, the corresponding stress for untreated soil, lime stabilised and cement-lime modified filler are 0.74, 0.92 and 0.99. As for the energy evolution, the increasing dry density can enhance elastic and dissipated energies through denser particle arrangements, while a higher modifier content raises total energy. When the cement content is 6%, the total energy is more than 8 times higher than that of the untreated material, reflecting increased brittleness to a sudden fracture. The improvements are attributed to the formation of acicular and platy hydration products, which can tighten the pore structure. The study underscores the importance of lime and cement in ensuring subgrade stability for high-speed railways in Southwest China’s red bed regions.</p></div>","PeriodicalId":500,"journal":{"name":"Bulletin of Engineering Geology and the Environment","volume":"84 6","pages":""},"PeriodicalIF":4.2000,"publicationDate":"2025-05-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of Engineering Geology and the Environment","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s10064-025-04337-5","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ENVIRONMENTAL","Score":null,"Total":0}
引用次数: 0

Abstract

The construction of high-speed railway in Southwest China must traverse extensive regions of red mudstone. However, due to the humid subtropical monsoon climate in Southwest region, the red mudstone is often exposed to a high-water content or saturated state for extended time, and the poor mechanical properties under such condition cannot satisfy the requirements of high-speed railway subgrade. This paper proposes the use of lime and cement to improve the saturated unconfined compression strength (UCS) of the red mudstone fill material. Comprehensive tests, including UCS tests and scanning electron microscopy, were conducted on cement-lime modified red mudstone. Results show that lime stabilisation can significantly enhance the UCS and elastic modulus with the increase of dry density and modifier content. For the specimens with 4% lime and 6% cement, both peak strength and elastic modulus of the modified samples are more than 10 times higher than those of the untreated ones. The modulus exhibits nonlinear degradation with the development of shear stress, but the degradation can be improved with the increase of dry density and modifier content. At 60% of initial tangent modulus, the corresponding stress for untreated soil, lime stabilised and cement-lime modified filler are 0.74, 0.92 and 0.99. As for the energy evolution, the increasing dry density can enhance elastic and dissipated energies through denser particle arrangements, while a higher modifier content raises total energy. When the cement content is 6%, the total energy is more than 8 times higher than that of the untreated material, reflecting increased brittleness to a sudden fracture. The improvements are attributed to the formation of acicular and platy hydration products, which can tighten the pore structure. The study underscores the importance of lime and cement in ensuring subgrade stability for high-speed railways in Southwest China’s red bed regions.

水泥-石灰改性红泥岩作为高速铁路填料的多尺度研究
中国西南高速铁路的建设必须穿越广阔的红泥岩地区。然而,由于西南地区属湿润的亚热带季风气候,红泥岩往往长期处于高含水率或饱和状态,这种状态下的力学性能较差,不能满足高速铁路路基的要求。提出用石灰和水泥提高红泥岩填料的饱和无侧限抗压强度。对水泥-石灰改性红泥岩进行了UCS试验和扫描电镜综合试验。结果表明:随着干密度和改性剂含量的增加,石灰稳定剂能显著提高单抗强度和弹性模量;在掺量为4%石灰和6%水泥的情况下,改性后的峰值强度和弹性模量均比未处理的高10倍以上。模量随剪应力的增大呈非线性退化,但随着干密度和改性剂含量的增加,这种退化可以得到改善。在初始切线模量的60%时,原生土、石灰稳定土和水泥-石灰改性填料的相应应力分别为0.74、0.92和0.99。在能量演化方面,随着干密度的增加,颗粒排列密度增大,弹性能和耗散能增加,改性剂含量增加,总能量增加。当水泥掺量为6%时,总能量比未处理材料高8倍以上,反映了脆性对突然断裂的增加。这种改善归因于针状和板状水化产物的形成,这可以收紧孔隙结构。该研究强调了石灰和水泥在确保中国西南红床地区高速铁路路基稳定性方面的重要性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Bulletin of Engineering Geology and the Environment
Bulletin of Engineering Geology and the Environment 工程技术-地球科学综合
CiteScore
7.10
自引率
11.90%
发文量
445
审稿时长
4.1 months
期刊介绍: Engineering geology is defined in the statutes of the IAEG as the science devoted to the investigation, study and solution of engineering and environmental problems which may arise as the result of the interaction between geology and the works or activities of man, as well as of the prediction of and development of measures for the prevention or remediation of geological hazards. Engineering geology embraces: • the applications/implications of the geomorphology, structural geology, and hydrogeological conditions of geological formations; • the characterisation of the mineralogical, physico-geomechanical, chemical and hydraulic properties of all earth materials involved in construction, resource recovery and environmental change; • the assessment of the mechanical and hydrological behaviour of soil and rock masses; • the prediction of changes to the above properties with time; • the determination of the parameters to be considered in the stability analysis of engineering works and earth masses.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信