Yeison Núñez-de la Rosa, Vladimir A. Ballesteros-Ballesteros, Luis Guillermo Cuadrado Durango, Jorge Luis Nisperuza Toledo, Maria Fátima das Graças Fernandes, José M. Aquino
{"title":"Catalytic Oxidation of Imidacloprid Insecticide by Cu(II)/Peroxymonosulfate System","authors":"Yeison Núñez-de la Rosa, Vladimir A. Ballesteros-Ballesteros, Luis Guillermo Cuadrado Durango, Jorge Luis Nisperuza Toledo, Maria Fátima das Graças Fernandes, José M. Aquino","doi":"10.1007/s11270-025-07921-3","DOIUrl":null,"url":null,"abstract":"<div><p>Water contamination by synthetic organic compounds is one of the major environmental issues facing the world today. Among the available methods to treat them, catalytic advanced oxidation processes using Cu(II) ions to activate peroxymonosulfate is a potential candidate at slightly alkaline conditions (pH 8). In this work, we investigated the influence of PMS concentration (0–1000 μmol L<sup>–1</sup>), solution pH (7–10), and the effect of water matrix (ultrapure, tap, and simulated municipal wastewater—SMWW) on imidacloprid (IMD) insecticide oxidation. After optimization of the investigated variables (500 μmol L<sup>–1</sup> PMS and pH 8), almost complete IMD oxidation was achieved in 6 h using ultrapure and tap water. The main detected byproducts resulting from IMD oxidation in ultrapure water are due to hydroxylation reactions and rupture of the imidazolidine ring. When SMWW was used, IMD oxidation was only 10% in 6 h, probably due to the scavenging effect of inorganic and organic compounds. The main produced working oxidants were radical (mainly HO<sup>●</sup> and SO<sub>4</sub><sup>●–</sup>) and non-radical (<sup>1</sup>O<sub>2</sub>, Cu(I), and Cu(III)) species, based on scavenging experiments and mass spectrometry detection of produced DMPO byproducts. Among these, HO<sup>●</sup> species seems to promptly oxidize IMD.</p></div>","PeriodicalId":808,"journal":{"name":"Water, Air, & Soil Pollution","volume":"236 5","pages":""},"PeriodicalIF":3.8000,"publicationDate":"2025-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Water, Air, & Soil Pollution","FirstCategoryId":"6","ListUrlMain":"https://link.springer.com/article/10.1007/s11270-025-07921-3","RegionNum":4,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENVIRONMENTAL SCIENCES","Score":null,"Total":0}
引用次数: 0
Abstract
Water contamination by synthetic organic compounds is one of the major environmental issues facing the world today. Among the available methods to treat them, catalytic advanced oxidation processes using Cu(II) ions to activate peroxymonosulfate is a potential candidate at slightly alkaline conditions (pH 8). In this work, we investigated the influence of PMS concentration (0–1000 μmol L–1), solution pH (7–10), and the effect of water matrix (ultrapure, tap, and simulated municipal wastewater—SMWW) on imidacloprid (IMD) insecticide oxidation. After optimization of the investigated variables (500 μmol L–1 PMS and pH 8), almost complete IMD oxidation was achieved in 6 h using ultrapure and tap water. The main detected byproducts resulting from IMD oxidation in ultrapure water are due to hydroxylation reactions and rupture of the imidazolidine ring. When SMWW was used, IMD oxidation was only 10% in 6 h, probably due to the scavenging effect of inorganic and organic compounds. The main produced working oxidants were radical (mainly HO● and SO4●–) and non-radical (1O2, Cu(I), and Cu(III)) species, based on scavenging experiments and mass spectrometry detection of produced DMPO byproducts. Among these, HO● species seems to promptly oxidize IMD.
期刊介绍:
Water, Air, & Soil Pollution is an international, interdisciplinary journal on all aspects of pollution and solutions to pollution in the biosphere. This includes chemical, physical and biological processes affecting flora, fauna, water, air and soil in relation to environmental pollution. Because of its scope, the subject areas are diverse and include all aspects of pollution sources, transport, deposition, accumulation, acid precipitation, atmospheric pollution, metals, aquatic pollution including marine pollution and ground water, waste water, pesticides, soil pollution, sewage, sediment pollution, forestry pollution, effects of pollutants on humans, vegetation, fish, aquatic species, micro-organisms, and animals, environmental and molecular toxicology applied to pollution research, biosensors, global and climate change, ecological implications of pollution and pollution models. Water, Air, & Soil Pollution also publishes manuscripts on novel methods used in the study of environmental pollutants, environmental toxicology, environmental biology, novel environmental engineering related to pollution, biodiversity as influenced by pollution, novel environmental biotechnology as applied to pollution (e.g. bioremediation), environmental modelling and biorestoration of polluted environments.
Articles should not be submitted that are of local interest only and do not advance international knowledge in environmental pollution and solutions to pollution. Articles that simply replicate known knowledge or techniques while researching a local pollution problem will normally be rejected without review. Submitted articles must have up-to-date references, employ the correct experimental replication and statistical analysis, where needed and contain a significant contribution to new knowledge. The publishing and editorial team sincerely appreciate your cooperation.
Water, Air, & Soil Pollution publishes research papers; review articles; mini-reviews; and book reviews.