Investigation on the intra-particle anisotropic transport properties of a beech wood particle during pyrolysis

IF 4.1 2区材料科学 Q2 ENGINEERING, CHEMICAL

Particuology Pub Date : 2025-02-10 DOI:10.1016/j.partic.2025.01.006

Andrea Dernbecher , Supriya Bhaskaran , Nicole Vorhauer-Huget , Jakob Seidenbecher , Suresh Gopalkrishna , Lucas Briest , Alba Dieguez-Alonso

{"title":"Investigation on the intra-particle anisotropic transport properties of a beech wood particle during pyrolysis","authors":"Andrea Dernbecher , Supriya Bhaskaran , Nicole Vorhauer-Huget , Jakob Seidenbecher , Suresh Gopalkrishna , Lucas Briest , Alba Dieguez-Alonso","doi":"10.1016/j.partic.2025.01.006","DOIUrl":null,"url":null,"abstract":"<div><div>In the present study, the influence of the dynamic and anistropic pore microstructure of wood and char samples on the intra-particle flow permeability and tortuosity was investigated. To this end, a beech wood sphere was pyrolysed at different temperatures (100 °C, 200 °C, 300 °C, 400 °C, and 500 °C) and characterised, after each pyrolysis step, by X-ray micro-computed tomography (μ-CT). From the μ-CT images, the structural geometry of the particle at the different conversion degrees achieved at each temperature level was extracted. The porosity evolution was characterised, accounting for pores larger than 15 μm, which was the limit of resolution for μ-CT imaging in this study. The structural geometry was divided in subdomains and used for CFD (computational fluid dynamics) simulations, where the pressure loss at different velocities and in different directions with respect to the main pores (vessel cells) was determined and used to estimate the dynamic and anisotropic permeabilities. The permeability differed by an order of magnitude in the direction of the main pores (vessel cells) in comparison to the perpendicular directions, supporting the need to develop permeability tensors for improved simulations of the pyrolysis process at particle level, accounting for the coupled effects of microstructure, transport, and reaction.</div></div>","PeriodicalId":401,"journal":{"name":"Particuology","volume":"98 ","pages":"Pages 172-190"},"PeriodicalIF":4.1000,"publicationDate":"2025-02-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Particuology","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1674200125000227","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}

引用次数: 0

Abstract

In the present study, the influence of the dynamic and anistropic pore microstructure of wood and char samples on the intra-particle flow permeability and tortuosity was investigated. To this end, a beech wood sphere was pyrolysed at different temperatures (100 °C, 200 °C, 300 °C, 400 °C, and 500 °C) and characterised, after each pyrolysis step, by X-ray micro-computed tomography (μ-CT). From the μ-CT images, the structural geometry of the particle at the different conversion degrees achieved at each temperature level was extracted. The porosity evolution was characterised, accounting for pores larger than 15 μm, which was the limit of resolution for μ-CT imaging in this study. The structural geometry was divided in subdomains and used for CFD (computational fluid dynamics) simulations, where the pressure loss at different velocities and in different directions with respect to the main pores (vessel cells) was determined and used to estimate the dynamic and anisotropic permeabilities. The permeability differed by an order of magnitude in the direction of the main pores (vessel cells) in comparison to the perpendicular directions, supporting the need to develop permeability tensors for improved simulations of the pyrolysis process at particle level, accounting for the coupled effects of microstructure, transport, and reaction.

Abstract Image

查看原文本刊更多论文

求助全文

约1分钟内获得全文求助全文

来源期刊

Particuology 工程技术-材料科学：综合

CiteScore

6.70

自引率

2.90%

发文量

1730

审稿时长

32 days

期刊介绍： The word ‘particuology’ was coined to parallel the discipline for the science and technology of particles. Particuology is an interdisciplinary journal that publishes frontier research articles and critical reviews on the discovery, formulation and engineering of particulate materials, processes and systems. It especially welcomes contributions utilising advanced theoretical, modelling and measurement methods to enable the discovery and creation of new particulate materials, and the manufacturing of functional particulate-based products, such as sensors. Papers are handled by Thematic Editors who oversee contributions from specific subject fields. These fields are classified into: Particle Synthesis and Modification; Particle Characterization and Measurement; Granular Systems and Bulk Solids Technology; Fluidization and Particle-Fluid Systems; Aerosols; and Applications of Particle Technology. Key topics concerning the creation and processing of particulates include: -Modelling and simulation of particle formation, collective behaviour of particles and systems for particle production over a broad spectrum of length scales -Mining of experimental data for particle synthesis and surface properties to facilitate the creation of new materials and processes -Particle design and preparation including controlled response and sensing functionalities in formation, delivery systems and biological systems, etc. -Experimental and computational methods for visualization and analysis of particulate system. These topics are broadly relevant to the production of materials, pharmaceuticals and food, and to the conversion of energy resources to fuels and protection of the environment.