A quick and effective approach for removing Ni(II) from paper mill wastewater with magnesium ferrite nanoadsorbent: method development, reusability, isotherm models, and adsorption kinetics

IF 2.1 4区材料科学 Q3 CHEMISTRY, MULTIDISCIPLINARY

Journal of Nanoparticle Research Pub Date : 2025-02-18 DOI:10.1007/s11051-025-06256-8

Aleyna Bahçıvan, Arda Atakol, Buse Tuğba Zaman, Gamze Dalgıç Bozyiğit, Selami Demir, Sezgin Bakırdere

{"title":"A quick and effective approach for removing Ni(II) from paper mill wastewater with magnesium ferrite nanoadsorbent: method development, reusability, isotherm models, and adsorption kinetics","authors":"Aleyna Bahçıvan, Arda Atakol, Buse Tuğba Zaman, Gamze Dalgıç Bozyiğit, Selami Demir, Sezgin Bakırdere","doi":"10.1007/s11051-025-06256-8","DOIUrl":null,"url":null,"abstract":"<div><p>The removal of Ni<sup>2+</sup> ions from the effluent of the paper mill was accomplished by using magnesium ferrite nanoparticles. The nanoparticles were produced through a sol–gel process at low temperatures. Experimental factors were meticulously optimized to enhance the adsorption process. Optimal conditions were determined to be 1.0 mL of buffer solution with a pH of 8.0, 100 mg of nano-sorbent, and mixing for 30 min. When these conditions were put to test, the removal efficiency was enhanced to ≥ 98.4%. Additionally, it was discovered that the nanoparticles exhibit exceptional reusability upon regeneration after the first use. The investigation of adsorption equilibrium was conducted utilizing the Langmuir, Freundlich, and Sips models. The Sips isotherm demonstrated the strongest correlation with the experimental results, as indicated by the coefficient of determination (<i>R</i><sup>2</sup>) of 0.9976 while the reaction order was estimated as 1.61 by the kinetic model.</p></div>","PeriodicalId":653,"journal":{"name":"Journal of Nanoparticle Research","volume":"27 3","pages":""},"PeriodicalIF":2.1000,"publicationDate":"2025-02-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Nanoparticle Research","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11051-025-06256-8","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

Abstract

The removal of Ni²⁺ ions from the effluent of the paper mill was accomplished by using magnesium ferrite nanoparticles. The nanoparticles were produced through a sol–gel process at low temperatures. Experimental factors were meticulously optimized to enhance the adsorption process. Optimal conditions were determined to be 1.0 mL of buffer solution with a pH of 8.0, 100 mg of nano-sorbent, and mixing for 30 min. When these conditions were put to test, the removal efficiency was enhanced to ≥ 98.4%. Additionally, it was discovered that the nanoparticles exhibit exceptional reusability upon regeneration after the first use. The investigation of adsorption equilibrium was conducted utilizing the Langmuir, Freundlich, and Sips models. The Sips isotherm demonstrated the strongest correlation with the experimental results, as indicated by the coefficient of determination (R²) of 0.9976 while the reaction order was estimated as 1.61 by the kinetic model.

Abstract Image

查看原文本刊更多论文

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Nanoparticle Research 工程技术-材料科学：综合

CiteScore

4.40

自引率

4.00%

发文量

198

审稿时长

3.9 months

期刊介绍： The objective of the Journal of Nanoparticle Research is to disseminate knowledge of the physical, chemical and biological phenomena and processes in structures that have at least one lengthscale ranging from molecular to approximately 100 nm (or submicron in some situations), and exhibit improved and novel properties that are a direct result of their small size. Nanoparticle research is a key component of nanoscience, nanoengineering and nanotechnology. The focus of the Journal is on the specific concepts, properties, phenomena, and processes related to particles, tubes, layers, macromolecules, clusters and other finite structures of the nanoscale size range. Synthesis, assembly, transport, reactivity, and stability of such structures are considered. Development of in-situ and ex-situ instrumentation for characterization of nanoparticles and their interfaces should be based on new principles for probing properties and phenomena not well understood at the nanometer scale. Modeling and simulation may include atom-based quantum mechanics; molecular dynamics; single-particle, multi-body and continuum based models; fractals; other methods suitable for modeling particle synthesis, assembling and interaction processes. Realization and application of systems, structures and devices with novel functions obtained via precursor nanoparticles is emphasized. Approaches may include gas-, liquid-, solid-, and vacuum-based processes, size reduction, chemical- and bio-self assembly. Contributions include utilization of nanoparticle systems for enhancing a phenomenon or process and particle assembling into hierarchical structures, as well as formulation and the administration of drugs. Synergistic approaches originating from different disciplines and technologies, and interaction between the research providers and users in this field, are encouraged.