Seawater-mixed concretes containing supplementary cementitious materials: compressive strength, e-modulus, electrical resistivity, and life cycle assessment

Abstract

Water and concrete are the materials humans consume the most on earth. By 2040, several countries are expected to face extreme water stress and the need for significant growth in their infrastructure simultaneously. Water is a fundamental ingredient for concrete production, and the need for infrastructure growth can further increase the water demand for concrete production and thus affect these regions facing water scarcity. Including supplementary cementitious materials (SCMs), non-metallic fibres, and coated/polymer reinforcements can increase the feasibility of producing concrete with seawater (SW). There is a lack of information on the long-term strength and durability properties of SW-mixed concretes (SWC) produced with SCMs. This paper optimises binder compositions with CEM I, fly ash, ground granulated blast furnace slag (slag), and metakaolin suitable for adapting SWC based on performance indicators. Binary and ternary blended concretes of similar binder content (360 kg/m³) and w/b (0.45) were designed and cast with the SCMs mentioned above. Compressive strength, surface resistivity, and accelerated carbonation tests were conducted on the concrete produced with freshwater (FW) and seawater (SW). SWC produced with 30% slag and 15% metakaolin had higher electrical resistivity and an improvement in compressive strength (up to 30%) than other combinations used for producing SWC. Life cycle assessment identified that the concretes produced with fly ash, and ternary combination of fly ash and metakaolin had the least water depletion potential (WDP) compared to other SW-mixed concretes. Also, the replacement of FW by SW reduces the WDP up to 50%.