Food Waste Ash Supported Nickel Catalyst to Steam Gasification of Food Waste for Enhanced Tar Reduction and Hydrogen Production

IF 3.1 3区 工程技术 Q3 ENERGY & FUELS
Aayush Raizada, Amresh Shukla, Sanjeev Yadav, Sourodipto Modak, Priyanka Katiyar
{"title":"Food Waste Ash Supported Nickel Catalyst to Steam Gasification of Food Waste for Enhanced Tar Reduction and Hydrogen Production","authors":"Aayush Raizada,&nbsp;Amresh Shukla,&nbsp;Sanjeev Yadav,&nbsp;Sourodipto Modak,&nbsp;Priyanka Katiyar","doi":"10.1007/s12155-025-10822-2","DOIUrl":null,"url":null,"abstract":"<div><p>In this study, a novel catalyst was developed by loading 5-10wt% Ni on food waste ash. The food waste ash worked as a support and promoter for the Ni catalyst. Thereafter, the catalyst was tested for enhanced tar reduction and higher H<sub>2</sub> production during steam gasification of food waste. The performance of this catalyst was evaluated using four different steam gasification processes; (i) conventional overlapping process (COP), (ii) COP in the presence of a catalyst (COP + catalyst), (iii) integrated two-stage process (ITP) and (iv) ITP in the presence of a catalyst (ITP + catalyst). All the experiments were performed at the constant temperature of 850 °C with a steam flow rate of 2.92 mL/min in a downdraft gasifier. Results showed that 33.3% catalyst content in the feed to the conventional gasification process of (COP + catalyst) enhanced the tar reduction by almost 90% and increased the syngas yield. The process of COP + catalyst yielded the highest syngas production at 91.90%. However, the use of the same catalyst did not enhance the tar reduction and syngas yield from the integrated process (ITP + catalyst) Additionally, the syngas composition showed that the hydrogen fraction in syngas from the processes with catalysts (COP + catalyst and ITP + catalyst) was higher (71.74% and 65.76%, respectively) than that from COP (66.27%) and ITP (59.75%) respectively. Therefore, the hydrogen yield was found to be highest (1.3 m<sup>3</sup>/kg) for COP + catalyst, as syngas and hydrogen fraction in syngas were highest for COP + catalyst. The tar composition indicated that tar from COP and ITP contained the highest fraction of anhydrous sugars (~ 23% &amp; ~ 27%, respectively), whereas tar from COP + catalyst contained the highest fraction of oxygenated cyclic compounds (~ 17%) and tar from ITP + catalyst contained the highest fraction of aliphatic hydrocarbons (~ 18%). Moreover, cyclic hydrocarbons, aromatic hydrocarbons, esters, and aliphatic alcohols were present in a lesser fraction in tar from COP + catalyst and ITP + catalyst than from COP and ITP.</p></div>","PeriodicalId":487,"journal":{"name":"BioEnergy Research","volume":"18 1","pages":""},"PeriodicalIF":3.1000,"publicationDate":"2025-02-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"BioEnergy Research","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s12155-025-10822-2","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

Abstract

In this study, a novel catalyst was developed by loading 5-10wt% Ni on food waste ash. The food waste ash worked as a support and promoter for the Ni catalyst. Thereafter, the catalyst was tested for enhanced tar reduction and higher H2 production during steam gasification of food waste. The performance of this catalyst was evaluated using four different steam gasification processes; (i) conventional overlapping process (COP), (ii) COP in the presence of a catalyst (COP + catalyst), (iii) integrated two-stage process (ITP) and (iv) ITP in the presence of a catalyst (ITP + catalyst). All the experiments were performed at the constant temperature of 850 °C with a steam flow rate of 2.92 mL/min in a downdraft gasifier. Results showed that 33.3% catalyst content in the feed to the conventional gasification process of (COP + catalyst) enhanced the tar reduction by almost 90% and increased the syngas yield. The process of COP + catalyst yielded the highest syngas production at 91.90%. However, the use of the same catalyst did not enhance the tar reduction and syngas yield from the integrated process (ITP + catalyst) Additionally, the syngas composition showed that the hydrogen fraction in syngas from the processes with catalysts (COP + catalyst and ITP + catalyst) was higher (71.74% and 65.76%, respectively) than that from COP (66.27%) and ITP (59.75%) respectively. Therefore, the hydrogen yield was found to be highest (1.3 m3/kg) for COP + catalyst, as syngas and hydrogen fraction in syngas were highest for COP + catalyst. The tar composition indicated that tar from COP and ITP contained the highest fraction of anhydrous sugars (~ 23% & ~ 27%, respectively), whereas tar from COP + catalyst contained the highest fraction of oxygenated cyclic compounds (~ 17%) and tar from ITP + catalyst contained the highest fraction of aliphatic hydrocarbons (~ 18%). Moreover, cyclic hydrocarbons, aromatic hydrocarbons, esters, and aliphatic alcohols were present in a lesser fraction in tar from COP + catalyst and ITP + catalyst than from COP and ITP.

食物垃圾灰负载镍催化剂对食物垃圾蒸汽气化的促进焦油还原和制氢
在本研究中,开发了一种新型催化剂,将5-10wt%的Ni负载在食物垃圾灰上。餐厨垃圾灰作为镍催化剂的载体和促进剂。随后,对该催化剂进行了测试,以提高食物垃圾蒸汽气化过程中的焦油还原和H2产量。采用四种不同的蒸汽气化工艺对该催化剂的性能进行了评价;(i)常规重叠法(COP), (ii)有催化剂的重叠法(COP +催化剂),(iii)一体化两阶段法(ITP)和(iv)有催化剂的重叠法(ITP +催化剂)。所有实验均在850℃恒温下进行,蒸汽流量为2.92 mL/min。结果表明,在常规气化工艺(COP +催化剂)的原料中添加33.3%的催化剂,可使焦油还原率提高近90%,合成气收率提高。COP +催化剂的合成气产率最高,达91.90%。然而,使用相同的催化剂并没有提高ITP +催化剂的焦油还原率和合成气收率。此外,合成气组成表明,使用催化剂(COP +催化剂和ITP +催化剂)的合成气中氢组分(分别为71.74%和65.76%)高于COP(66.27%)和ITP(59.75%)的合成气。因此,COP +催化剂的产氢率最高(1.3 m3/kg),因为COP +催化剂的合成气和合成气中的氢含量最高。焦油组成表明,COP和ITP的无水糖含量最高(分别为~ 23%和~ 27%),而COP +催化剂的含氧环化合物含量最高(~ 17%),ITP +催化剂的含脂肪烃含量最高(~ 18%)。此外,COP +催化剂和ITP +催化剂在焦油中的环烃、芳香烃、酯类和脂肪族醇的含量低于COP和ITP催化剂。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
BioEnergy Research
BioEnergy Research ENERGY & FUELS-ENVIRONMENTAL SCIENCES
CiteScore
6.70
自引率
8.30%
发文量
174
审稿时长
3 months
期刊介绍: BioEnergy Research fills a void in the rapidly growing area of feedstock biology research related to biomass, biofuels, and bioenergy. The journal publishes a wide range of articles, including peer-reviewed scientific research, reviews, perspectives and commentary, industry news, and government policy updates. Its coverage brings together a uniquely broad combination of disciplines with a common focus on feedstock biology and science, related to biomass, biofeedstock, and bioenergy production.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信