{"title":"Practical application of CS-CG Stabilised soil in subgrade construction.","authors":"Lv Anling, Liu Jianshu, Ma Longfei","doi":"10.1080/09593330.2024.2447962","DOIUrl":null,"url":null,"abstract":"<p><p>To enhance the water stability and bearing capacity of the Shandong Ming Dong Expressway's soaked subgrade, carbide slag (CS) and coal gangue powder (CG) were used as stabilisers. Stabiliser dosages of 5%, 10%, and 15%, with the CS:CG ratios of 0:100, 30:70, 50:50, 70:30, and 100:0, were tested. The study evaluated the performance of CS-CG stabilised soil through unconfined compressive strength (UCS) tests at 7 and 28 days, six dry-wet cycles, a 30-day water immersion test, pH test, swell rate test, XRD, SEM, and MIP analyses. A UCS prediction model for CS-CG stabilised soil under dry-wet cycles was established. Results showed that CS-CG-10%-(70:30) achieved a UCS of 5.87 MPa after 28 days, decreasing to 4.77 MPa after six dry-wet cycles, indicating excellent bearing capacity and water stability. Increasing CS content improved UCS after 30 days' immersion, reaching 5.74 MPa for CS-CG-10%-(70:30). The CS-CG mix produced hydration products like C-(A)-S-H gel, Ca(OH)<sub>2</sub> crystals, and ettringite, enhancing pore structure and UCS. More dry-wet cycles increased hydration products and pore diameter, causing an initial UCS drop before stabilisation. The UCS prediction model using the Exp3p2 (<math><mi>Y</mi><mo>=</mo><msup><mi>e</mi><mrow><mrow><mo>(</mo><mi>A</mi><msup><mi>X</mi><mn>2</mn></msup></mrow><mrow><mo>+</mo><mi>BX</mi><mo>+</mo><mi>C</mi><mo>)</mo></mrow></mrow></msup></math>) equation offers higher accuracy, supporting strength prediction. The study found that CS-CG stabilised soil behaves similarly to cement-stabilised soil in settlement.</p>","PeriodicalId":12009,"journal":{"name":"Environmental Technology","volume":" ","pages":"1-17"},"PeriodicalIF":2.2000,"publicationDate":"2025-01-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Environmental Technology","FirstCategoryId":"93","ListUrlMain":"https://doi.org/10.1080/09593330.2024.2447962","RegionNum":4,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENVIRONMENTAL SCIENCES","Score":null,"Total":0}
引用次数: 0
Abstract
To enhance the water stability and bearing capacity of the Shandong Ming Dong Expressway's soaked subgrade, carbide slag (CS) and coal gangue powder (CG) were used as stabilisers. Stabiliser dosages of 5%, 10%, and 15%, with the CS:CG ratios of 0:100, 30:70, 50:50, 70:30, and 100:0, were tested. The study evaluated the performance of CS-CG stabilised soil through unconfined compressive strength (UCS) tests at 7 and 28 days, six dry-wet cycles, a 30-day water immersion test, pH test, swell rate test, XRD, SEM, and MIP analyses. A UCS prediction model for CS-CG stabilised soil under dry-wet cycles was established. Results showed that CS-CG-10%-(70:30) achieved a UCS of 5.87 MPa after 28 days, decreasing to 4.77 MPa after six dry-wet cycles, indicating excellent bearing capacity and water stability. Increasing CS content improved UCS after 30 days' immersion, reaching 5.74 MPa for CS-CG-10%-(70:30). The CS-CG mix produced hydration products like C-(A)-S-H gel, Ca(OH)2 crystals, and ettringite, enhancing pore structure and UCS. More dry-wet cycles increased hydration products and pore diameter, causing an initial UCS drop before stabilisation. The UCS prediction model using the Exp3p2 () equation offers higher accuracy, supporting strength prediction. The study found that CS-CG stabilised soil behaves similarly to cement-stabilised soil in settlement.
期刊介绍:
Environmental Technology is a leading journal for the rapid publication of science and technology papers on a wide range of topics in applied environmental studies, from environmental engineering to environmental biotechnology, the circular economy, municipal and industrial wastewater management, drinking-water treatment, air- and water-pollution control, solid-waste management, industrial hygiene and associated technologies.
Environmental Technology is intended to provide rapid publication of new developments in environmental technology. The journal has an international readership with a broad scientific base. Contributions will be accepted from scientists and engineers in industry, government and universities. Accepted manuscripts are generally published within four months.
Please note that Environmental Technology does not publish any review papers unless for a specified special issue which is decided by the Editor. Please do submit your review papers to our sister journal Environmental Technology Reviews at http://www.tandfonline.com/toc/tetr20/current