Evaluation and optimization of physical, mechanical, and biological characteristics of 3D printed Whitlockite/calcium silicate composite scaffold for bone tissue regeneration using response surface methodology.

Abstract

Calcium phosphate-based bioscaffolds are used for bone tissue regeneration because of their physical and chemical resemblance to human bone. Calcium, phosphate, sodium, potassium, magnesium, and silicon are important components of human bone. The successful biomimicking of human bone characteristics involves incorporating all the human bone elements into the scaffold material. In this work, Mg-Whitlockite (WH) and Calcium Silicate (CS) were selected as matrix and reinforcement respectively, because of their desirable elemental composition and regenerative properties. The magnesium in WH increases mineralization in bone, and the silicon ions in CS support vascularization. The Mg-WH was synthesized using the wet chemical method, and powder characterization tests were performed. Response surface methodology (RSM) is used to design the experiments with a combination of material compositions, infill ratios (IFs), and sintering temperatures (STs). The WH/CS bioceramic composite is 3D printed in three different compositions: 100/0, 75/25, and 50/50 wt%, with IFs of 50%, 75%, and 100%. The physical and mechanical characterization study of printed samples is conducted and the result is optimized using RSM. ANOVA (Analysis of Variance) is used to establish the relationship between input parameters and responses. The optimized input parameters were the WH/CS composition of 50/50 wt%, IF of 50%, and ST of 1150 °C, which bring out the best possible combination of physical and mechanical characteristics. The RSM optimized response was a density of 2.27 g cm^-3, porosity of 36.74%, wettability of 45.79%, shrinkage of 25.13%, compressive strength of 12 MPa, and compressive modulus of 208.49 MPa with 92% desirability. The biological characterization studies were conducted for the scaffold samples prepared with optimized input parameters. The biological studies confirmed the capabilities of the WH/CS composite scaffolds in bone regenerative applications.