Customizing loose nanofiltration membranes on nanofiber scaffolds with surfactants: Towards efficient dye/salt selective separation

IF 8.1 1区 工程技术 Q1 ENGINEERING, CHEMICAL
Haining You, Keyang Cui, Xinlin Zha, Tao Mei, Chenguang Yang, Ying Liu, Yingying Li, Qinghua Zhao, Xiufang Li, Tao Zhao, Ke Liu, Dong Wang
{"title":"Customizing loose nanofiltration membranes on nanofiber scaffolds with surfactants: Towards efficient dye/salt selective separation","authors":"Haining You, Keyang Cui, Xinlin Zha, Tao Mei, Chenguang Yang, Ying Liu, Yingying Li, Qinghua Zhao, Xiufang Li, Tao Zhao, Ke Liu, Dong Wang","doi":"10.1016/j.seppur.2025.131624","DOIUrl":null,"url":null,"abstract":"A loose nanofiltration membrane prepared using a nanofiber support layer demonstrates significant efficiency and convenience for textile wastewater treatment. However, maintaining high permeability alongside elevated dye/salt selectivity remains a critical challenge. Surfactants, as promising agents for enhancing interfacial tension, can facilitate the preparation of loose nanofiltration membranes (LFNM) by influencing the diffusion rates of amine monomers during the interfacial polymerization process. In this study, sodium dodecylbenzene sulfonate (SDBS) was utilized as a water-phase additive to fabricate nanofiltration membranes of varying thickness on the surface of nanofiber membrane supports. Scanning electron microscopy and atomic force microscopy revealed systematic changes in the morphology of the LFNM, showing a correlation between thickness and surface roughness. Notably, the addition of a small amount of SDBS significantly enhanced membrane permeability and dye/salt selectivity, resulting in LFNMs superior to control membranes. This improvement can be attributed to a more porous polyamide (PA) layer, increased surface hydrophilicity, and a higher molecular weight cutoff. The results indicate that LFNM-0.5 exhibits a high rejection rate for dye (Congo Red) at 98.9% and a low rejection rate for salt (NaCl) at 6.5%. Furthermore, during the selectivity tests on mixed solutions, the dye/salt selectivity of LFNM for Na<sub>2</sub>SO<sub>4</sub>/CR and NaCl/CR remained stable after 2 h of operation, with the highest selectivity factors reaching 104 and 116.5, respectively. The antifouling and acid-base resistance assessments also demonstrated excellent performance. This suggests that LFNM-0.5 possesses good stability in the dye/salt separation process. This study introduces a novel approach for the preparation of loose nanofiltration membranes by modulating the surfactant strategy for the microscopic structure of the membranes.","PeriodicalId":427,"journal":{"name":"Separation and Purification Technology","volume":"49 1","pages":""},"PeriodicalIF":8.1000,"publicationDate":"2025-01-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Separation and Purification Technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1016/j.seppur.2025.131624","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

A loose nanofiltration membrane prepared using a nanofiber support layer demonstrates significant efficiency and convenience for textile wastewater treatment. However, maintaining high permeability alongside elevated dye/salt selectivity remains a critical challenge. Surfactants, as promising agents for enhancing interfacial tension, can facilitate the preparation of loose nanofiltration membranes (LFNM) by influencing the diffusion rates of amine monomers during the interfacial polymerization process. In this study, sodium dodecylbenzene sulfonate (SDBS) was utilized as a water-phase additive to fabricate nanofiltration membranes of varying thickness on the surface of nanofiber membrane supports. Scanning electron microscopy and atomic force microscopy revealed systematic changes in the morphology of the LFNM, showing a correlation between thickness and surface roughness. Notably, the addition of a small amount of SDBS significantly enhanced membrane permeability and dye/salt selectivity, resulting in LFNMs superior to control membranes. This improvement can be attributed to a more porous polyamide (PA) layer, increased surface hydrophilicity, and a higher molecular weight cutoff. The results indicate that LFNM-0.5 exhibits a high rejection rate for dye (Congo Red) at 98.9% and a low rejection rate for salt (NaCl) at 6.5%. Furthermore, during the selectivity tests on mixed solutions, the dye/salt selectivity of LFNM for Na2SO4/CR and NaCl/CR remained stable after 2 h of operation, with the highest selectivity factors reaching 104 and 116.5, respectively. The antifouling and acid-base resistance assessments also demonstrated excellent performance. This suggests that LFNM-0.5 possesses good stability in the dye/salt separation process. This study introduces a novel approach for the preparation of loose nanofiltration membranes by modulating the surfactant strategy for the microscopic structure of the membranes.

Abstract Image

使用表面活性剂在纳米纤维支架上定制松散纳滤膜:实现高效的染料/盐选择性分离
使用纳米纤维支撑层制备的松散纳滤膜在纺织废水处理方面具有显著的效率和便利性。然而,在提高染料/盐选择性的同时保持高渗透性仍然是一个严峻的挑战。表面活性剂作为增强界面张力的有效制剂,可在界面聚合过程中影响胺单体的扩散速率,从而促进松散纳米过滤膜(LFNM)的制备。本研究利用十二烷基苯磺酸钠(SDBS)作为水相添加剂,在纳米纤维膜支架表面制备不同厚度的纳滤膜。扫描电子显微镜和原子力显微镜揭示了 LFNM 形态的系统性变化,显示出厚度和表面粗糙度之间的相关性。值得注意的是,添加少量的 SDBS 能显著提高膜的渗透性和染料/盐选择性,使 LFNM 优于对照膜。这种改善可归因于聚酰胺(PA)层的多孔性、表面亲水性的增加以及更高的分子量截止值。结果表明,LFNM-0.5 对染料(刚果红)的截留率高达 98.9%,对盐分(氯化钠)的截留率低至 6.5%。此外,在混合溶液的选择性测试中,LFNM 对 Na2SO4/CR 和 NaCl/CR 的染料/盐选择性在运行 2 小时后保持稳定,最高选择因子分别达到 104 和 116.5。防污性和耐酸碱性评估也显示出卓越的性能。这表明 LFNM-0.5 在染料/盐分离过程中具有良好的稳定性。本研究介绍了一种通过调节表面活性剂策略来制备疏松纳滤膜微观结构的新方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Separation and Purification Technology
Separation and Purification Technology 工程技术-工程:化工
CiteScore
14.00
自引率
12.80%
发文量
2347
审稿时长
43 days
期刊介绍: Separation and Purification Technology is a premier journal committed to sharing innovative methods for separation and purification in chemical and environmental engineering, encompassing both homogeneous solutions and heterogeneous mixtures. Our scope includes the separation and/or purification of liquids, vapors, and gases, as well as carbon capture and separation techniques. However, it's important to note that methods solely intended for analytical purposes are not within the scope of the journal. Additionally, disciplines such as soil science, polymer science, and metallurgy fall outside the purview of Separation and Purification Technology. Join us in advancing the field of separation and purification methods for sustainable solutions in chemical and environmental engineering.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信