Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels.

Abstract

Fluorine-based mold fluxes are critical for continuous casting of peritectic steels, controlling heat transfer and preventing cracks. However, environmental and health concerns associated with fluorine have spurred the search for alternative flux compositions. This study applied a factorial design to explore the effects of Na2O, TiO2, B2O3, and fluorine on key properties such as viscosity, crystallization temperature, and melting behavior. Analytical methods, including viscosity measurements, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM-EDS), combined with thermodynamic modeling, were used to evaluate performance. Four formulations were selected based on factorial design results. Sample A, with high Na2O, exhibited intense crystallization of merwinite (Ca3MgSi2O8) and perovskite (CaTiO3). Sample B, incorporating B2O3, had reduced crystallization and suitable viscosity (2.97 Pa·s). Sample C, with a slightly higher fluorine content than Sample B and without B2O3, presented balanced low viscosity (1.75 Pa·s) with a moderate crystallization tendency. Sample D, free of fluorine and B2O3, showed high viscosity (4.58 Pa·s) and significant crystallization. These results demonstrate that fluorine-free fluxes with properties comparable to fluorine-based compositions can be developed, offering a sustainable alternative for steelmaking. Industrial trials are necessary to validate their performance under operational conditions.