{"title":"Dispersive properties of metamaterial beams with rod-like resonators: A coupled axial-flexural analysis","authors":"Andrea Burlon","doi":"10.1016/j.ijsolstr.2024.113145","DOIUrl":null,"url":null,"abstract":"<div><div>This paper addresses the propagation of coupled axial-flexural waves in metamaterial beams with rod-like resonators. Utilizing an exact frequency-dependent stiffness method, based on Euler–Bernoulli beam assumption for rods and host beam, and fully accounting for axial-flexural coupling phenomena, several adimensional parametric analyses are performed for investigating the dispersive properties of the metamaterial beams. The analyses reveal novel and relevant aspects unaddressed in previous studies. Firstly, they show that certain rod configurations lead to significant interference between flexural resonance and the band gaps opened by axial resonance, whereas other configurations enable flexural resonance to open substantial band gaps without interference from axial resonance. Results are complemented by 3D finite element analyses proving evidence of the findings and validating the method. Additional analyses demonstrate that adding a tip mass to the rods, while keeping the total mass of the resonator unchanged, can significantly reduce the opening frequency of the band gaps and can attenuate or remove the interference caused by flexural resonance within the band gaps opened by axial resonance; the rotational inertia of the tip mass can also play a significant role in removing flexural resonance interference. Notably, the paper also reveals that the attenuation phenomena for the coupled problem with a single set of rods are governed by the opening of weak band gaps, rather than by traditional band gaps; this aspect is elucidated by showing Bloch mode shapes of the infinite metamaterial beam and frequency response of the corresponding finite beam. Results and proposed design prove to be useful and promising for locally resonant beams featuring rod-like resonators, both as an alternative to traditional beam-like resonators and for their applicability in the 3D printing process of locally resonant structures, where rods serve as elastic elements in constructing the resonators.</div></div>","PeriodicalId":14311,"journal":{"name":"International Journal of Solids and Structures","volume":"308 ","pages":"Article 113145"},"PeriodicalIF":3.4000,"publicationDate":"2024-11-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Solids and Structures","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0020768324005043","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0
Abstract
This paper addresses the propagation of coupled axial-flexural waves in metamaterial beams with rod-like resonators. Utilizing an exact frequency-dependent stiffness method, based on Euler–Bernoulli beam assumption for rods and host beam, and fully accounting for axial-flexural coupling phenomena, several adimensional parametric analyses are performed for investigating the dispersive properties of the metamaterial beams. The analyses reveal novel and relevant aspects unaddressed in previous studies. Firstly, they show that certain rod configurations lead to significant interference between flexural resonance and the band gaps opened by axial resonance, whereas other configurations enable flexural resonance to open substantial band gaps without interference from axial resonance. Results are complemented by 3D finite element analyses proving evidence of the findings and validating the method. Additional analyses demonstrate that adding a tip mass to the rods, while keeping the total mass of the resonator unchanged, can significantly reduce the opening frequency of the band gaps and can attenuate or remove the interference caused by flexural resonance within the band gaps opened by axial resonance; the rotational inertia of the tip mass can also play a significant role in removing flexural resonance interference. Notably, the paper also reveals that the attenuation phenomena for the coupled problem with a single set of rods are governed by the opening of weak band gaps, rather than by traditional band gaps; this aspect is elucidated by showing Bloch mode shapes of the infinite metamaterial beam and frequency response of the corresponding finite beam. Results and proposed design prove to be useful and promising for locally resonant beams featuring rod-like resonators, both as an alternative to traditional beam-like resonators and for their applicability in the 3D printing process of locally resonant structures, where rods serve as elastic elements in constructing the resonators.
期刊介绍:
The International Journal of Solids and Structures has as its objective the publication and dissemination of original research in Mechanics of Solids and Structures as a field of Applied Science and Engineering. It fosters thus the exchange of ideas among workers in different parts of the world and also among workers who emphasize different aspects of the foundations and applications of the field.
Standing as it does at the cross-roads of Materials Science, Life Sciences, Mathematics, Physics and Engineering Design, the Mechanics of Solids and Structures is experiencing considerable growth as a result of recent technological advances. The Journal, by providing an international medium of communication, is encouraging this growth and is encompassing all aspects of the field from the more classical problems of structural analysis to mechanics of solids continually interacting with other media and including fracture, flow, wave propagation, heat transfer, thermal effects in solids, optimum design methods, model analysis, structural topology and numerical techniques. Interest extends to both inorganic and organic solids and structures.