Experimental investigation on bearing capacity of rock-socketed bored piles in silty clay stratum in beach areas

Abstract

In this study, six rock-socketed bored piles were tested in the field to investigate the bearing characteristics of rock-socketed bored piles in silty clay formations in coastal areas, and the model piles were simulated and optimized using the finite element (FE) method. The results showed that the lateral resistance of the piles in the clay layer is less than 50 kPa, and the lateral resistance of the rock-embedded portion is within 136.2−166.4 kPa. Compared with increasing the rock-embedded depth, increasing the diameter of the test piles can improve their vertical bearing capacity more effectively. The average horizontal critical load (H_cr) increased by 84.54 %, and the average horizontal ultimate load (H_u) increased by 50.3 % for the 800 mm diameter piles compared to the 600 mm diameter piles. Also, at the end of the test, the 600 mm diameter test piles showed severe damage at 6−9.5 D below the mud surface and were more susceptible to instability damage than the 800 mm diameter test piles. In soft clay strata, the 'm' values converged rapidly with increasing horizontal displacement and stabilized when the displacement exceeded 10 mm. The FE simulations confirmed that the horizontal displacement of the pile mainly occurs at 4 m depth below the mud surface, and the displacement of the test pile can be effectively reduced by reinforcing the soil around the pile. The silt at the bottom of the pile is one of the critical factors causing the uneven settlement of the test pile, severely affecting the vertical bearing capacity of the pile foundation.