Self-catalyzed growth of sub-25-nm-diameter InAs nanowire arrays on Si patterned substrate

IF 3.8 2区 材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY
Xiaoye Wang , Xiaoguang Yang , Tao Yang
{"title":"Self-catalyzed growth of sub-25-nm-diameter InAs nanowire arrays on Si patterned substrate","authors":"Xiaoye Wang ,&nbsp;Xiaoguang Yang ,&nbsp;Tao Yang","doi":"10.1016/j.vacuum.2024.113832","DOIUrl":null,"url":null,"abstract":"<div><div>The feature size of advanced Si-based chips is approaching its physical limit, and it is difficult to continue Moore's Law by simply pursuing the technical route of miniaturizing device size to increase the integrated density. III-V nanowire devices represented by InAs material have much higher mobility than Si based devices, but they have not been successfully applied to CMOS nanowire devices and have not shown excellent performance. The reason is that the hole mobility of III-V materials is much lower than their electron mobility. If the nanowire diameter becomes ultrafine, the quantum confinement effect becomes more prominent, the light hole band will reverse above the heavy hole band, and the hole mobility will be greatly increased. Aiming at the integrability of III-V high mobility CMOS devices on Si, how to prepare ultrafine InAs nanowire arrays on Si/SiO<sub>2</sub> patterned substrates has been studied in this work. New method in this work has solved the problem that the nanohole will enlarge due to etching side wall of nanohole by HF process before growth. A technology and mechanism of ultrafine InAs nanowire arrays grown by this method was developed, and the smallest diameter of nanowire in array has reached only 25 nm.</div></div>","PeriodicalId":23559,"journal":{"name":"Vacuum","volume":"232 ","pages":"Article 113832"},"PeriodicalIF":3.8000,"publicationDate":"2024-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Vacuum","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0042207X24008789","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The feature size of advanced Si-based chips is approaching its physical limit, and it is difficult to continue Moore's Law by simply pursuing the technical route of miniaturizing device size to increase the integrated density. III-V nanowire devices represented by InAs material have much higher mobility than Si based devices, but they have not been successfully applied to CMOS nanowire devices and have not shown excellent performance. The reason is that the hole mobility of III-V materials is much lower than their electron mobility. If the nanowire diameter becomes ultrafine, the quantum confinement effect becomes more prominent, the light hole band will reverse above the heavy hole band, and the hole mobility will be greatly increased. Aiming at the integrability of III-V high mobility CMOS devices on Si, how to prepare ultrafine InAs nanowire arrays on Si/SiO2 patterned substrates has been studied in this work. New method in this work has solved the problem that the nanohole will enlarge due to etching side wall of nanohole by HF process before growth. A technology and mechanism of ultrafine InAs nanowire arrays grown by this method was developed, and the smallest diameter of nanowire in array has reached only 25 nm.
直径亚 25 纳米 InAs 纳米线阵列在硅图案衬底上的自催化生长
先进硅基芯片的特征尺寸已接近其物理极限,单纯追求器件尺寸微型化以提高集成密度的技术路线很难延续摩尔定律。以 InAs 材料为代表的 III-V 纳米线器件具有远高于硅基器件的迁移率,但它们尚未成功应用于 CMOS 纳米线器件,也未显示出卓越的性能。原因在于 III-V 材料的空穴迁移率远远低于其电子迁移率。如果纳米线直径变得超细,量子约束效应就会变得更加突出,轻空穴带将反向高于重空穴带,空穴迁移率将大大提高。为了在硅上实现 III-V 族高迁移率 CMOS 器件的可集成性,本文研究了如何在硅/二氧化硅图案化衬底上制备超细 InAs 纳米线阵列。这项工作中的新方法解决了纳米孔在生长前因高频工艺蚀刻纳米孔侧壁而导致纳米孔增大的问题。利用这种方法生长的超细 InAs 纳米线阵列的技术和机理已经开发出来,阵列中纳米线的最小直径仅为 25 nm。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Vacuum
Vacuum 工程技术-材料科学:综合
CiteScore
6.80
自引率
17.50%
发文量
0
审稿时长
34 days
期刊介绍: Vacuum is an international rapid publications journal with a focus on short communication. All papers are peer-reviewed, with the review process for short communication geared towards very fast turnaround times. The journal also published full research papers, thematic issues and selected papers from leading conferences. A report in Vacuum should represent a major advance in an area that involves a controlled environment at pressures of one atmosphere or below. The scope of the journal includes: 1. Vacuum; original developments in vacuum pumping and instrumentation, vacuum measurement, vacuum gas dynamics, gas-surface interactions, surface treatment for UHV applications and low outgassing, vacuum melting, sintering, and vacuum metrology. Technology and solutions for large-scale facilities (e.g., particle accelerators and fusion devices). New instrumentation ( e.g., detectors and electron microscopes). 2. Plasma science; advances in PVD, CVD, plasma-assisted CVD, ion sources, deposition processes and analysis. 3. Surface science; surface engineering, surface chemistry, surface analysis, crystal growth, ion-surface interactions and etching, nanometer-scale processing, surface modification. 4. Materials science; novel functional or structural materials. Metals, ceramics, and polymers. Experiments, simulations, and modelling for understanding structure-property relationships. Thin films and coatings. Nanostructures and ion implantation.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信