Synthesis of high purity Ti2AlC MAX phase by combustion method through thermal explosion mode: Optimization of process parameters & evaluation of microstructure
{"title":"Synthesis of high purity Ti2AlC MAX phase by combustion method through thermal explosion mode: Optimization of process parameters & evaluation of microstructure","authors":"Amir Edrisi , Hossein Aghajani , Seyed Hossein Seyedein , Arvin Taghizadeh Tabrizi","doi":"10.1016/j.ceramint.2024.09.431","DOIUrl":null,"url":null,"abstract":"<div><div>Obtaining high-purity MAX-phase powders is a challenging issue. Therefore, in this article, the effects of two key parameters, including mechanical activation time (1, 2, and 3 h), and preheating temperature (800 and 1000 °C) were investigated on the formation mechanism of Ti<sub>2</sub>AlC MAX phase using mechanically activated (assisted) self-propagating high-temperature synthesis (MA-SHS) combustion method through thermal explosion mode. For this aim, a powder mixture of titanium, aluminum, and carbon with a stoichiometry ratio of (2:1:1) was used. Differential thermal analysis (DTA) was carried out to evaluate the effect of mechanical activation and preheating temperature of the formation temperature of the target MAX phase. Subsequently, the microstructural, phase analysis, chemical composition, and determination of surface chemical states studies were carried out through scanning electron microscopy (SEM), X-ray energy distribution spectroscopy (EDS) transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), and X-ray photoelectric spectroscopy (XPS), respectively. DTA results illustrated that applying mechanical activation alters the formation temperature, which leads to an increase in the purity of the MAX phase. The quantitative measurements were carried out using the Rietveld method to determine the purity of the achieved MAX phase. The results indicated that samples subjected to 2 h of mechanical activation at a preheat temperature of 1000 °C exhibited to contain 96.1 % of Ti<sub>2</sub>AlC MAX phase, which is the highest value among other specimens and the lowest amount of secondary and oxide phases (3.9 % of TiC) during the combustion synthesis process compared to other samples.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 23","pages":"Pages 50846-50854"},"PeriodicalIF":5.1000,"publicationDate":"2024-10-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224044675","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
Obtaining high-purity MAX-phase powders is a challenging issue. Therefore, in this article, the effects of two key parameters, including mechanical activation time (1, 2, and 3 h), and preheating temperature (800 and 1000 °C) were investigated on the formation mechanism of Ti2AlC MAX phase using mechanically activated (assisted) self-propagating high-temperature synthesis (MA-SHS) combustion method through thermal explosion mode. For this aim, a powder mixture of titanium, aluminum, and carbon with a stoichiometry ratio of (2:1:1) was used. Differential thermal analysis (DTA) was carried out to evaluate the effect of mechanical activation and preheating temperature of the formation temperature of the target MAX phase. Subsequently, the microstructural, phase analysis, chemical composition, and determination of surface chemical states studies were carried out through scanning electron microscopy (SEM), X-ray energy distribution spectroscopy (EDS) transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), and X-ray photoelectric spectroscopy (XPS), respectively. DTA results illustrated that applying mechanical activation alters the formation temperature, which leads to an increase in the purity of the MAX phase. The quantitative measurements were carried out using the Rietveld method to determine the purity of the achieved MAX phase. The results indicated that samples subjected to 2 h of mechanical activation at a preheat temperature of 1000 °C exhibited to contain 96.1 % of Ti2AlC MAX phase, which is the highest value among other specimens and the lowest amount of secondary and oxide phases (3.9 % of TiC) during the combustion synthesis process compared to other samples.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.