The relationship between microstructural characteristics and galvanic effect, SCC behavior of friction stir welded joint in as-welded and heat-treated conditions

IF 11.2 1区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
Yanming Xia, Dejing Zhou, Da-Hai Xia, Zhiming Gao, Linyue Bai, Wenbin Hu
{"title":"The relationship between microstructural characteristics and galvanic effect, SCC behavior of friction stir welded joint in as-welded and heat-treated conditions","authors":"Yanming Xia, Dejing Zhou, Da-Hai Xia, Zhiming Gao, Linyue Bai, Wenbin Hu","doi":"10.1016/j.jmst.2024.11.005","DOIUrl":null,"url":null,"abstract":"The detailed precipitation behavior and grain structure in different sub-regions of friction stir welding (FSW) AA6061-T6 joint after post-weld solution and aging treatments were explored. And the effects of microstructural evolution on mechanical properties, macro/micro electrochemical corrosion behavior and stress corrosion cracking behavior were investigated. The inherent microstructural gradients in FSW joint lead to dramatic degradation of mechanical properties and the presence of macro-galvanic effect, with the latter exacerbating anodic dissolution in heat-affected zone (HAZ) induced by micro-galvanic corrosion and inhibiting pitting corrosion in stirred zone (SZ). Post-weld heat treatment (PWHT) causes the formation of matrix precipitates with similar densities in different sub-regions, resulting in optimized precipitate distribution, comprehensive hardness recovery, and diminished macro-galvanic effect. Grain boundary misorientation angle, grain size and pre-existing dislocations synergistically influence the evolution of grain boundary precipitates (GBPs) and precipitation-free zones (PFZs) during the PWHT. As a result, pitting corrosion is the dominant corrosion form in SZ due to the narrowest PFZ width and dispersed GBPs, while intergranular corrosion is caused by continuous GBPs in other sub-regions. This study verified the dominant role of macro-galvanic effect and micro-galvanic effect in the corrosion process of FSW joint and FSW-PWHT joint, respectively. The maximum SCC susceptibility at HAZ in As-FSWed joint is dominated by enhanced anodic dissolution due to macro-galvanic effect. The SCC sensitivity of FSW-PWHT joint is higher than that of FSW joint due to high electrochemical activity and corrosion rate caused by the severe stress concentration between sub-grains and recrystallized grains at the thermomechanical affected zone (TMAZ)/SZ interface.","PeriodicalId":16154,"journal":{"name":"Journal of Materials Science & Technology","volume":"67 1","pages":""},"PeriodicalIF":11.2000,"publicationDate":"2024-11-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Science & Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1016/j.jmst.2024.11.005","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The detailed precipitation behavior and grain structure in different sub-regions of friction stir welding (FSW) AA6061-T6 joint after post-weld solution and aging treatments were explored. And the effects of microstructural evolution on mechanical properties, macro/micro electrochemical corrosion behavior and stress corrosion cracking behavior were investigated. The inherent microstructural gradients in FSW joint lead to dramatic degradation of mechanical properties and the presence of macro-galvanic effect, with the latter exacerbating anodic dissolution in heat-affected zone (HAZ) induced by micro-galvanic corrosion and inhibiting pitting corrosion in stirred zone (SZ). Post-weld heat treatment (PWHT) causes the formation of matrix precipitates with similar densities in different sub-regions, resulting in optimized precipitate distribution, comprehensive hardness recovery, and diminished macro-galvanic effect. Grain boundary misorientation angle, grain size and pre-existing dislocations synergistically influence the evolution of grain boundary precipitates (GBPs) and precipitation-free zones (PFZs) during the PWHT. As a result, pitting corrosion is the dominant corrosion form in SZ due to the narrowest PFZ width and dispersed GBPs, while intergranular corrosion is caused by continuous GBPs in other sub-regions. This study verified the dominant role of macro-galvanic effect and micro-galvanic effect in the corrosion process of FSW joint and FSW-PWHT joint, respectively. The maximum SCC susceptibility at HAZ in As-FSWed joint is dominated by enhanced anodic dissolution due to macro-galvanic effect. The SCC sensitivity of FSW-PWHT joint is higher than that of FSW joint due to high electrochemical activity and corrosion rate caused by the severe stress concentration between sub-grains and recrystallized grains at the thermomechanical affected zone (TMAZ)/SZ interface.

Abstract Image

焊接状态和热处理状态下搅拌摩擦焊接接头的微观结构特征与电化效应、SCC 行为之间的关系
研究了搅拌摩擦焊(FSW)AA6061-T6 接头在焊后固溶和时效处理后不同子区域的详细析出行为和晶粒结构。并研究了微观结构演变对力学性能、宏观/微观电化学腐蚀行为和应力腐蚀开裂行为的影响。FSW 接头固有的微观结构梯度导致了力学性能的急剧下降和宏观电化学效应的存在,后者加剧了微观电化学腐蚀引起的热影响区(HAZ)的阳极溶解,抑制了搅拌区(SZ)的点腐蚀。焊后热处理(PWHT)会在不同的子区域形成密度相似的基体析出物,从而优化析出物分布,全面恢复硬度,并减弱宏观电蚀作用。在 PWHT 过程中,晶界错向角、晶粒大小和预先存在的位错会协同影响晶界析出物 (GBP) 和无析出区 (PFZ) 的演变。因此,由于无析出区宽度最窄和无析出物分散,点蚀是无析出区的主要腐蚀形式,而晶间腐蚀则是由其他子区域的连续无析出物引起的。本研究分别验证了宏观电蚀效应和微观电蚀效应在 FSW 接头和 FSW-PWHT 接头腐蚀过程中的主导作用。As-FSWed 接头热影响区的最大 SCC 敏感性是由宏观电镀效应导致的阳极溶解增强所主导的。FSW-PWHT 接头的 SCC 敏感性高于 FSW 接头,这是由于在热机械影响区 (TMAZ)/SZ 界面的亚晶粒和再结晶晶粒之间存在严重的应力集中,导致电化学活性和腐蚀速率较高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Materials Science & Technology
Journal of Materials Science & Technology 工程技术-材料科学:综合
CiteScore
20.00
自引率
11.00%
发文量
995
审稿时长
13 days
期刊介绍: Journal of Materials Science & Technology strives to promote global collaboration in the field of materials science and technology. It primarily publishes original research papers, invited review articles, letters, research notes, and summaries of scientific achievements. The journal covers a wide range of materials science and technology topics, including metallic materials, inorganic nonmetallic materials, and composite materials.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信