Additively Manufactured Stainless Steel Wind Tunnel Model Support Featuring Honeycomb Structures for Vibration Attenuation

Abstract

Wind tunnel model support (WTMS) is an indispensable component of wind tunnel testing. However, the presence of vibrations within the model-support system can compromise the accuracy of data and give rise to significant safety hazards. In this study, an approach for vibration attenuation by incorporating honeycomb structures into the design of the WTMS is proposed. To this end, stainless steel WTMSs with integrated honeycomb structures are fabricated by selective laser melting (SLM). Results showed that stainless steels prepared under optimized SLM processing parameters exhibit high crystallinity and consist of single-phase Fe–Cr–Ni alloy. The stainless steels exhibited robust mechanical properties, including a tensile strength of ≈1 GPa, an elongation of ≈8%, and a compressive strength of ≈1.4 GPa. These exceptional mechanical properties can be attributed to the formation of a cellular structure and tangled dislocations. The first-order and the third-order resonant response of WTMS honeycomb structures can be effectively reduced. The vibration reduction mechanism can be attributed to the occurrence of local resonance when the natural frequency of the internal periodic unit of the WTMS closely matched the vibration frequency of the model. The utilization of honeycomb structures holds significant potential for achieving vibration attenuation in WTMS.