Advancing Circular Economy: Comparative Analysis of Recycled and Virgin Carbon Fiber 3D Printed Composites on Performance and Eco-Efficiency

Abstract

Carbon fiber-reinforced polymer composites are widely used for their corrosion resistance, high strength, stiffness, and lightweight properties. However, the extensive use of carbon fiber generates significant waste at the end of its lifecycle. Recycling technologies can effectively recover carbon fiber from this waste, making it suitable for reuse in various applications. Recently, there has been a growing trend in using recycled carbon fiber as a reinforcement material in polymer matrices, offering a cost-effective alternative to virgin carbon fiber while maintaining excellent mechanical properties. However, most studies focus on the mechanical strength of parts made from recycled and virgin carbon fibers, with less attention given to the environmental impacts of these materials. The primary objective of this study is the comparative analysis of the specimens manufactured using recycled and virgin carbon fiber-reinforced polyamide-12 material based on the mechanical performance, life cycle cost, and environmental impact. The experimental investigations showed that the mechanical performance of the recycled carbon fiber polyamide-12 (rCFRP12) composites are more efficient than the specimens manufactured using the virgin carbon fiber polyamide-12 (vCFRP12) composites such as three-point bending test results show that parts made from rCFRP12 composites achieved a flexural strength of 56.25 MPa, outperforming those made with vCFRP12 (49.9 MPa). Additionally, the recycled composite specimens also exhibited higher tensile strength than their virgin carbon fiber counterparts. The life cycle analysis revealed that samples made with recycled carbon fiber have a lower environmental impact, reducing global warming, ozone depletion, and carcinogenic effects by 11.98% compared to those made with virgin carbon fiber. Additionally, the production cost of recycled carbon fiber is significantly lower than that of virgin carbon fiber.