Electromagnetic penetrometer for high viscosity measurement using a new displacement sensor

IF 4.1 3区工程技术 Q2 ENGINEERING, ELECTRICAL & ELECTRONIC

Sensors and Actuators A-physical Pub Date : 2024-11-08 DOI:10.1016/j.sna.2024.116018

Zakarya Abbassi , Amine Benabdellah , Mustapha Adar , Youssef Najih , Abdelrhani Nakheli

引用次数: 0

Abstract

In this article, we present an effective device for measuring the high viscosity of Newtonian liquids using a cylindrical penetrometer. The technique relies on monitoring the temporal evolution of penetration depth. Penetration depth is accurately determined by employing a novel electromagnetic micrometric displacement sensor, which is recorded and processed via a National Instruments DAQ card and a custom LabVIEW® program. The introduction of this new electromagnetic displacement sensor, characterized by its high accuracy and its stability, is imperative to ensure reliable measurements of high viscosity. This sensor enables direct, precise, and dependable digital depth of penetration readings. We validated this device by measuring the viscosity of Maltitol as a function of temperature, and the results demonstrate reasonable agreement with values found in the literature.

查看原文本刊更多论文

使用新型位移传感器测量高粘度的电磁渗透仪

在本文中，我们介绍了一种利用圆柱形渗透仪测量牛顿液体高粘度的有效装置。该技术依靠监测渗透深度的时间演变。通过使用新型电磁微位移传感器精确测定渗透深度，并通过美国国家仪器公司的 DAQ 卡和定制的 LabVIEW® 程序进行记录和处理。这种新型电磁位移传感器具有高精度和高稳定性的特点，必须采用这种传感器才能确保对高粘度进行可靠的测量。该传感器可实现直接、精确和可靠的数字渗透深度读数。我们通过测量麦芽糖醇的粘度与温度的函数关系验证了这一装置，结果表明与文献中的数值相当吻合。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Sensors and Actuators A-physical 工程技术-工程：电子与电气

CiteScore

8.10

自引率

6.50%

发文量

630

审稿时长

49 days

期刊介绍： Sensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas: • Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results. • Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon. • Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays. • Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers. Etc...