Synergistic effect of carbothermal reduction and sodium salts leaching in the process of iron recovery from copper slag

IF 6.9 2区 环境科学与生态学 Q1 ENGINEERING, CHEMICAL
Sonia Abid Bhatti, Xiu-chen Qiao
{"title":"Synergistic effect of carbothermal reduction and sodium salts leaching in the process of iron recovery from copper slag","authors":"Sonia Abid Bhatti,&nbsp;Xiu-chen Qiao","doi":"10.1016/j.psep.2024.11.031","DOIUrl":null,"url":null,"abstract":"<div><div>Copper slag is mostly considered a waste material and around 41 wt% of total iron content present in it is lost. Iron is mostly present in copper slag as fayalite (Fe<sub>2</sub>SiO<sub>4</sub>). In this study, Iron was recovered by the decomposition of Fe<sub>2</sub>SiO<sub>4</sub> using the synergistic effect of carbothermal reduction and sodium salts leaching for the first time. The results showed that 68.39 % of iron was recovered from copper slag by carbothermal reduction at 1000 °C for 1 hr. The iron recovery increased to 83.45, 93.39 and 97.8 %, respectively, after further 1 hr leaching by 2 M NaOH, 1 M Na<sub>2</sub>CO<sub>3</sub> and 2 M NaOH+1 M Na<sub>2</sub>CO<sub>3</sub> at 100 °C. The leaching results indicated that the increased NaOH concentration from 1 to 2 M improved the removal of silica, which in turn led to higher iron recovery. The increase of Na<sub>2</sub>CO<sub>3</sub> concentration from 1 to 2 M showed a negative effect on iron recovery. The combination of 2 M NaOH and 1 M Na<sub>2</sub>CO<sub>3</sub>, however, led to the highest iron recovery of 97.8 % because NaOH+Na<sub>2</sub>CO<sub>3</sub> gives Na<sub>2</sub>O that is easier to react with SiO<sub>2</sub> with only −194.3 kJ energy requirement. Mass balance calculations indicated that before the leaching process, 345 kg mass was lost, whereas, after the leaching process the amount of discarded waste was only 260.8 g. Therefore, the present study not only provides 97.8 % iron recovery but also reduces the discharge of secondary solid waste due to no addition of additives.</div></div>","PeriodicalId":20743,"journal":{"name":"Process Safety and Environmental Protection","volume":"193 ","pages":"Pages 170-182"},"PeriodicalIF":6.9000,"publicationDate":"2024-11-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Process Safety and Environmental Protection","FirstCategoryId":"93","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0957582024014435","RegionNum":2,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Copper slag is mostly considered a waste material and around 41 wt% of total iron content present in it is lost. Iron is mostly present in copper slag as fayalite (Fe2SiO4). In this study, Iron was recovered by the decomposition of Fe2SiO4 using the synergistic effect of carbothermal reduction and sodium salts leaching for the first time. The results showed that 68.39 % of iron was recovered from copper slag by carbothermal reduction at 1000 °C for 1 hr. The iron recovery increased to 83.45, 93.39 and 97.8 %, respectively, after further 1 hr leaching by 2 M NaOH, 1 M Na2CO3 and 2 M NaOH+1 M Na2CO3 at 100 °C. The leaching results indicated that the increased NaOH concentration from 1 to 2 M improved the removal of silica, which in turn led to higher iron recovery. The increase of Na2CO3 concentration from 1 to 2 M showed a negative effect on iron recovery. The combination of 2 M NaOH and 1 M Na2CO3, however, led to the highest iron recovery of 97.8 % because NaOH+Na2CO3 gives Na2O that is easier to react with SiO2 with only −194.3 kJ energy requirement. Mass balance calculations indicated that before the leaching process, 345 kg mass was lost, whereas, after the leaching process the amount of discarded waste was only 260.8 g. Therefore, the present study not only provides 97.8 % iron recovery but also reduces the discharge of secondary solid waste due to no addition of additives.
铜渣铁回收过程中碳热还原和钠盐浸出的协同效应
铜渣通常被认为是一种废料,其铁含量约占总含量的 41%。铁在铜渣中主要以辉绿岩(Fe2SiO4)的形式存在。本研究首次利用碳热还原和钠盐浸出的协同效应,通过分解 Fe2SiO4 来回收铁。结果表明,在 1000 °C 下进行 1 小时的碳热还原,可从铜渣中回收 68.39% 的铁。在 100 ℃ 下用 2 M NaOH、1 M Na2CO3 和 2 M NaOH+1 M Na2CO3 再浸出 1 小时后,铁的回收率分别增至 83.45%、93.39% 和 97.8%。浸出结果表明,将 NaOH 浓度从 1 M 提高到 2 M 可以提高硅的去除率,从而提高铁的回收率。Na2CO3 浓度从 1 M 增加到 2 M 对铁回收率有负面影响。但 2 M NaOH 和 1 M Na2CO3 的组合铁回收率最高,达到 97.8%,因为 NaOH+Na2CO3 产生的 Na2O 更容易与 SiO2 反应,只需要 -194.3 kJ 的能量。质量平衡计算表明,在浸出过程之前,损失了 345 千克的质量,而在浸出过程之后,丢弃的废物量仅为 260.8 克。因此,本研究不仅能实现 97.8% 的铁回收率,而且由于不添加添加剂,还减少了二次固体废物的排放。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Process Safety and Environmental Protection
Process Safety and Environmental Protection 环境科学-工程:化工
CiteScore
11.40
自引率
15.40%
发文量
929
审稿时长
8.0 months
期刊介绍: The Process Safety and Environmental Protection (PSEP) journal is a leading international publication that focuses on the publication of high-quality, original research papers in the field of engineering, specifically those related to the safety of industrial processes and environmental protection. The journal encourages submissions that present new developments in safety and environmental aspects, particularly those that show how research findings can be applied in process engineering design and practice. PSEP is particularly interested in research that brings fresh perspectives to established engineering principles, identifies unsolved problems, or suggests directions for future research. The journal also values contributions that push the boundaries of traditional engineering and welcomes multidisciplinary papers. PSEP's articles are abstracted and indexed by a range of databases and services, which helps to ensure that the journal's research is accessible and recognized in the academic and professional communities. These databases include ANTE, Chemical Abstracts, Chemical Hazards in Industry, Current Contents, Elsevier Engineering Information database, Pascal Francis, Web of Science, Scopus, Engineering Information Database EnCompass LIT (Elsevier), and INSPEC. This wide coverage facilitates the dissemination of the journal's content to a global audience interested in process safety and environmental engineering.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信