An experimental and analytical investigation to determine thermal conductivity of epoxy-filler composites for space applications

Abstract

Thermal conductivity of epoxy-filler composite based Thermal Interface Materials (TIMs) is of utmost importance for thermal management systems used in space applications. Previous studies have shown that depending on the filler particle mixed into the epoxy, thermal conductivity of the composite can either be increased or decreased. Towards that, we have selected four different filler particles (micron sized) – aluminium, copper, zinc and silver to enhance the thermal conductivity of the base epoxy. Thermal conductivity of these 4 epoxy-filler composites has been determined experimentally using an indigenous developed setup at the temperatures ranging from 4.2 K to 323 K. The values have also been reported at various volume fractions (up to 15 %). In addition, after each preparation as the filler particles are mixed mechanically into the epoxy, they are randomly distributed, and this can affect the composite’s thermal conductivity (for the same volume fraction). The experimental determination of thermal conductivity for all the possible distributions is a time consuming, and cumbersome task. In the literature, thermal conductivity values are usually reported for few possible distributions. Therefore, we have developed a novel analytical model to predict all the possible values of thermal conductivity for a specific volume fraction. The predicted values compare well with our experimental data reported in this work at temperatures ranging between 338 K (above room temperature) to 4.2 K (liquid helium temperature). The predicted values are also in good agreement with the experimental values of different fillers such as red mud, pine wood dust and glass fiber etc. from the literature. Additionally, in comparison to other theoretical models like Lewis-Nielsen, Rule of mixture, and Poisson’s distribution, the present model predicts the thermal conductivity values more precisely. This work will be significant in the designing of components where heat transfer plays an important role towards the safety of the component.