Multi-scale thermo-poro-mechanical simulation of the frost resistance of low-heat and moderate-heat hydraulic concrete considering the aging microstructure

IF 7.4 1区 工程技术 Q1 CONSTRUCTION & BUILDING TECHNOLOGY
Zhe Huang , Jiazhang Cao , Fuyuan Gong , Ding Nie , Wenwei Li , Peng Lin , He Zhang
{"title":"Multi-scale thermo-poro-mechanical simulation of the frost resistance of low-heat and moderate-heat hydraulic concrete considering the aging microstructure","authors":"Zhe Huang ,&nbsp;Jiazhang Cao ,&nbsp;Fuyuan Gong ,&nbsp;Ding Nie ,&nbsp;Wenwei Li ,&nbsp;Peng Lin ,&nbsp;He Zhang","doi":"10.1016/j.conbuildmat.2024.139062","DOIUrl":null,"url":null,"abstract":"<div><div>Hydraulic concrete structures in cold regions are vulnerable to freeze-thaw damage. This paper proposes a multi-scale simulation analysis approach to investigate the mechanical properties and frost resistance of Low-heat Portland (LHP) cement, Moderate-heat Portland (MHP) cement, and Ordinary Portland cement (OPC) concrete. The hydration heat, hydration degree, pore size distribution, and compressive strength of LHP, MHP, and OPC concrete at different curing ages, as well as the ice amount, expansion strain, and mechanical properties under different freeze-thaw cycles are calculated and compared. Due to the lower early-hydrated C<sub>3</sub>S content of LHP and the higher later-hydrated C<sub>2</sub>S content, the porosity of LHP after 90d curing is lower than that of MHP and OPC, resulting in better mechanical properties and frost resistance. On this basis, the evolution model proposed in this paper can quantitative analysis the frost resistance of cement paste based on different content of C<sub>3</sub>S and C<sub>2</sub>S, which provided a feasible method for predicting the frost resistance of hydraulic concrete structures in cold regions.</div></div>","PeriodicalId":288,"journal":{"name":"Construction and Building Materials","volume":"453 ","pages":"Article 139062"},"PeriodicalIF":7.4000,"publicationDate":"2024-11-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Construction and Building Materials","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0950061824042041","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

Abstract

Hydraulic concrete structures in cold regions are vulnerable to freeze-thaw damage. This paper proposes a multi-scale simulation analysis approach to investigate the mechanical properties and frost resistance of Low-heat Portland (LHP) cement, Moderate-heat Portland (MHP) cement, and Ordinary Portland cement (OPC) concrete. The hydration heat, hydration degree, pore size distribution, and compressive strength of LHP, MHP, and OPC concrete at different curing ages, as well as the ice amount, expansion strain, and mechanical properties under different freeze-thaw cycles are calculated and compared. Due to the lower early-hydrated C3S content of LHP and the higher later-hydrated C2S content, the porosity of LHP after 90d curing is lower than that of MHP and OPC, resulting in better mechanical properties and frost resistance. On this basis, the evolution model proposed in this paper can quantitative analysis the frost resistance of cement paste based on different content of C3S and C2S, which provided a feasible method for predicting the frost resistance of hydraulic concrete structures in cold regions.
考虑老化微观结构的低热和中热水工混凝土抗冻性的多尺度热孔力学模拟
寒冷地区的水工混凝土结构很容易受到冻融破坏。本文提出了一种多尺度模拟分析方法来研究低热硅酸盐(LHP)水泥、中热硅酸盐(MHP)水泥和普通硅酸盐水泥(OPC)混凝土的力学性能和抗冻性。计算并比较了 LHP、MHP 和 OPC 混凝土在不同养护龄期的水化热、水化程度、孔径分布和抗压强度,以及在不同冻融循环条件下的冰量、膨胀应变和力学性能。由于 LHP 早期水化的 C3S 含量较低,而后期水化的 C2S 含量较高,因此 90d 养护后 LHP 的孔隙率低于 MHP 和 OPC,从而具有更好的力学性能和抗冻性。在此基础上,本文提出的演化模型可以定量分析不同C3S和C2S含量水泥浆的抗冻性,为预测寒冷地区水工混凝土结构的抗冻性提供了可行的方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Construction and Building Materials
Construction and Building Materials 工程技术-材料科学:综合
CiteScore
13.80
自引率
21.60%
发文量
3632
审稿时长
82 days
期刊介绍: Construction and Building Materials offers an international platform for sharing innovative and original research and development in the realm of construction and building materials, along with their practical applications in new projects and repair practices. The journal publishes a diverse array of pioneering research and application papers, detailing laboratory investigations and, to a limited extent, numerical analyses or reports on full-scale projects. Multi-part papers are discouraged. Additionally, Construction and Building Materials features comprehensive case studies and insightful review articles that contribute to new insights in the field. Our focus is on papers related to construction materials, excluding those on structural engineering, geotechnics, and unbound highway layers. Covered materials and technologies encompass cement, concrete reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibers, recycled materials, bamboo, rammed earth, non-conventional building materials, bituminous materials, and applications in railway materials.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信