Roles of Al/Ni ratio and solidification cooling rate in grain boundary engineering of AlxCrFeMnNi(2-x) high entropy alloy

Abstract

In this work, the roles of Al/Ni ratio and solidification cooling rate in grain size, dendrite morphology and grain boundary characteristic of the Al_xCrFeMnNi_(2-x) (x = 0.3, 0.7 and1.0) high-entropy alloys (HEAs) were investigated. The results show that the increasing of Al/Ni ratio results in a transition from single-phase FCC to dual-phase BCC + B2 along with the reverse precipitation behavior of BCC phase. While the phase composition is not affected by solidification cooling rate. With the increasing of Al/Ni ratio and solidification cooling rate, a significant columnar-to-equiaxed transition (CET) behavior can be observed. That is, grain refinement and transition from columnar dendrites to equiaxial and cellular dendrites. This is mainly attributed to the constitutional supercooling (CS) caused by the solute interaction effect of Al and Ni, and which can be evaluated by P and Q parameters. In addition, in-situ formation of serrated grain boundaries (SGBs) can be also observed in solidification microstructures, and with the increasing of Al/Ni ratio, the proportion of SGBs increases gradually. Whether the B2 precipitated phase is present or not, the formation mechanism of SGBs is mainly attributed to the lattice strain energy caused by the segregation of Al and Ni. The strategy simultaneously achieving grain refinement, CET and in-situ forming SGBs during solidification by tailoring Al/Ni ratio opens new perspectives for grain boundary engineering.