Grain boundary sensitization kinetics of cold-rolled Al–Mg alloys

Abstract

As super-saturated solid solutions of Al-Mg, 5XXX series aluminum alloys are susceptible to sensitization via intergranular precipitation of the anodic β-phase, which promotes intergranular corrosion, exfoliation and stress corrosion cracking under environmental conditions. This study presents important updates to a Johnson–Mehl–Avarami–Kolmogorov (JMAK) type model for low-temperature sensitization, correlating the intergranular corrosion response to impingement of locally sensitized regions surrounding discrete β-phase grain boundary precipitates. It is demonstrated that the sensitization response of these alloys can be approached as a combination of two independent contributions: the geometric configuration of grain boundaries passing through the microstructure that are most prone to sensitization, and the rate that these boundaries sensitize due to the formation of the β-phase. This allows for the large sensitization response variations found between nominally identical materials produced by different suppliers, which originate due to a lack of constraints within current cold-rolled plate tempers, to be removed as a sample-dependent linear scaling factor that is separate of the rate kinetics. The JMAK model describes the kinetics of 5xxx series sensitization with excellent accuracy across all data available in the literature. The results of the model imply that sensitization at environmental temperatures proceeds via a site-saturated process, with the β-phase forming on a set density of preferential nucleation sites. It is shown that site-saturation allows for extension of the JMAK model to non-isothermal aging profiles and supports a diffusion pathway dominated by pipe diffusion to the interface followed by precipitate growth via the collector plate mechanism.