Interfacial Microstructure Evolution and Mechanical Properties of TC4/MgAl2O4 Joints Brazed with Ti–Zr–Cu–Ni Filler Metal

IF 2.9 2区材料科学 Q2 METALLURGY & METALLURGICAL ENGINEERING

Acta Metallurgica Sinica-English Letters Pub Date : 2024-09-13 DOI:10.1007/s40195-024-01761-6

Jiafen Song, Wei Guo, Shiming Xu, Ding Hao, Yajie Du, Jiangtao Xiong, Jinglong Li

{"title":"Interfacial Microstructure Evolution and Mechanical Properties of TC4/MgAl2O4 Joints Brazed with Ti–Zr–Cu–Ni Filler Metal","authors":"Jiafen Song, Wei Guo, Shiming Xu, Ding Hao, Yajie Du, Jiangtao Xiong, Jinglong Li","doi":"10.1007/s40195-024-01761-6","DOIUrl":null,"url":null,"abstract":"<div>In the present study, Ti–Zr–Cu–Ni amorphous filler metal was used to braze MgAl2O4 ceramic and Ti–6Al–4V (TC4) at 875, 900, 925, 950, 975 and 1000 °C for 10 min. The effects of brazing temperature on interfacial microstructure and mechanical properties of the joints were analyzed. The results showed that typical microstructure of the TC4/MgAl2O4 joint was solid solution (SS) α-Ti, acicular α-Ti + (Ti, Zr)2(Ni, Cu) layer, metallic glasses and TiO. With the increase in brazing temperature, (Ti, Zr)2(Ni, Cu) layer gradually dispersed at bonding interface, a continuous layer of TiO appears near MgAl2O4 ceramic. With the increase in brazing temperature, the hard and brittle (Ti, Zr)2(Ni, Cu) layer gradually dispersed, resulting in the maximum shear strength of 39.5 MPa. The high-resolution TEM revealed the presence of amorphous structure, which is composed of Ti, Zr, Cu, Ni and Al. The values of δ and ΔHmix are calculated to be about 8% and −39.82 kJ/mol for the amorphous phase.</div>","PeriodicalId":457,"journal":{"name":"Acta Metallurgica Sinica-English Letters","volume":"37 12","pages":"2057 - 2067"},"PeriodicalIF":2.9000,"publicationDate":"2024-09-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Sinica-English Letters","FirstCategoryId":"1","ListUrlMain":"https://link.springer.com/article/10.1007/s40195-024-01761-6","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 0

Abstract

In the present study, Ti–Zr–Cu–Ni amorphous filler metal was used to braze MgAl₂O₄ ceramic and Ti–6Al–4V (TC4) at 875, 900, 925, 950, 975 and 1000 °C for 10 min. The effects of brazing temperature on interfacial microstructure and mechanical properties of the joints were analyzed. The results showed that typical microstructure of the TC4/MgAl₂O₄ joint was solid solution (SS) α-Ti, acicular α-Ti + (Ti, Zr)₂(Ni, Cu) layer, metallic glasses and TiO. With the increase in brazing temperature, (Ti, Zr)₂(Ni, Cu) layer gradually dispersed at bonding interface, a continuous layer of TiO appears near MgAl₂O₄ ceramic. With the increase in brazing temperature, the hard and brittle (Ti, Zr)₂(Ni, Cu) layer gradually dispersed, resulting in the maximum shear strength of 39.5 MPa. The high-resolution TEM revealed the presence of amorphous structure, which is composed of Ti, Zr, Cu, Ni and Al. The values of δ and ΔH_mix are calculated to be about 8% and −39.82 kJ/mol for the amorphous phase.

查看原文本刊更多论文

用 Ti-Zr-Cu-Ni 填充金属钎焊 TC4/MgAl2O4 接头的界面微观结构演变和力学性能

在本研究中，使用 Ti-Zr-Cu-Ni 无定形填料金属在 875、900、925、950、975 和 1000 °C 下钎焊 MgAl2O4 陶瓷和 Ti-6Al-4V (TC4) 10 分钟。分析了钎焊温度对接头界面微观结构和机械性能的影响。结果表明，TC4/MgAl2O4 接头的典型微观结构为固溶体 (SS) α-Ti、针状 α-Ti + (Ti, Zr)2(Ni, Cu) 层、金属玻璃和 TiO。随着钎焊温度的升高，（Ti，Zr）2（Ni，Cu）层在结合界面逐渐分散，在 MgAl2O4 陶瓷附近出现了连续的 TiO 层。随着钎焊温度的升高，硬脆的（Ti、Zr）2（Ni、Cu）层逐渐分散，使最大剪切强度达到 39.5 MPa。高分辨率 TEM 显示了由 Ti、Zr、Cu、Ni 和 Al 组成的无定形结构。经计算，非晶相的δ 和 ΔHmix 值分别约为 8% 和 -39.82 kJ/mol。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Acta Metallurgica Sinica-English Letters METALLURGY & METALLURGICAL ENGINEERING-

CiteScore

6.60

自引率

14.30%

发文量

122

审稿时长

2 months

期刊介绍： This international journal presents compact reports of significant, original and timely research reflecting progress in metallurgy, materials science and engineering, including materials physics, physical metallurgy, and process metallurgy.