Evaluation of ZnO/NiO/kaolin nanocomposite as a sorbent/photocatalyst in hybrid water remediation process

Abstract

The colored effluents causing environmental pollution pose a threat to the world. This study aims to assess the effectiveness of nickel oxide/zinc oxide/kaolin nanocomposite (NiO/ZnO/Ka) in removing methylene blue (MB) from water. Furthermore, it aims to examine the impact of synergetic adsorption/photocatalytic degradation (APCD) on the MB adsorption capacity as well as the suitability of the nonlinear adsorption isotherm and kinetic modeling in analyzing the process. The composites ZnO/Ka and NiO/ZnO/Ka were synthesized by the sol–gel method and were characterized by X-ray diffraction, Fourier transform infra-red, field emission scanning electron microscopy, and Brunauer–Emmett–Teller. The impacts of various parameters, such as pH, initial concentration of MB, dose, ionic strength, and temperature, on MB removal were studied using adsorption and APCD. The results showed that ZnO/Ka had the maximum adsorption capacity of MB (39.31 mg/g) and the maximum removal (78.61%) under optimal conditions of pH 10, clay dosage of 0.1 g/25 mL, initial concentration of MB 200 mg/L, contact time of 15 min, and 298 K, while NiO/ZnO/Ka showed the maximum adsorption capacity of MB (40.88 mg/g) and maximum removal (83.74%) at pH 7. It was also noticed that Temkin and Fritz–Schlunder models are the best isotherm models, with the highest R² (1 and 0.842) for ZnO/Ka and NiO/ZnO/Ka, respectively. Moreover, the data of adsorption and photodegradation of MB onto ZnO/Ka and NiO/ZnO/Ka were revealed to follow pseudo-first-order and Avrami kinetic models with R² (0.897) for ZnO/Ka and (0.986) for NiO/ZnO/Ka. Overall, NiO/ZnO/Ka showed better removal of MB than ZnO/Ka, and the hybrid process (photodegradation process after adsorption) enhanced the overall efficiency of MB removal than adsorption alone.