{"title":"Eco-Friendly Synthesis of ZnO for Efficient Photodegradation of Pharmaceutical Drug Removal by Photocatalysis","authors":"Sharda Pandey*, Anchal Srivastava, Poonam Rawat, Satendra Kumar Chauhan, Anant Ram, Vishnu Kumar Diwedi, Rajesh Kumar Shukla and Navina Wadhwani, ","doi":"10.1021/acsomega.4c0627210.1021/acsomega.4c06272","DOIUrl":null,"url":null,"abstract":"<p >In the present work, a comparative study on eco-friendly synthesis of zinc oxide (ZnO) sample 1 and sample 2 with 3.17 and 4.17 M NaOH, respectively, is reported. Sample 2 with 4.17 M NaOH is applied in the photocatalytic degradation of paracetamol (pure and raw both) using the ultraviolet (UV, 280–400 nm) and UV/H<sub>2</sub>O<sub>2</sub> reaction systems. Pure paracetamol (PCM1) and raw paracetamol (PCM2) from tablets are used for photocatalytic degradation by photocatalysis. Our experimental evidence show that ZnO sample 2 was more active in the UV/H<sub>2</sub>O<sub>2</sub> reaction system than under ultraviolet (UV, 280–400 nm) irradiation only in the photocatalytic degradation process. Field emission scanning electron microscopy (FE-SEM) confirms the homogeneous growth of a rod-like structure for sample 1 and brittle and randomly aggregated rod-like and wire-like nanostructures for sample 2. The peaks observed in the region around 440 to 900 cm<sup>–1</sup> in the FTIR spectra for sample 1 and sample 2 annealed at 250 °C confirms the presence of ZnO bonds. UV absorption spectroscopy indicates a red shift in the absorption spectra due to the increase in the molar concentration of NaOH to 4.17 M for sample 2. In this study, the band gap values are found to be 3.33 and 3.01 eV for the synthesized ZnO sample 1 and sample 2, respectively, which are 40 and 360 meV less as compared to that of bulk ZnO (3.37 eV). The oxidation rate is increased in the UV/H<sub>2</sub>O<sub>2</sub> reaction system, producing the highest rate for PCM1 drug removal with rate constant 9.7 × 10<sup>–3</sup> min<sup>–1</sup> and half-life 71.5 min. The kinetic study results for the removal of PCM1 and PCM2 show good results and follow the pseudo-first-order kinetic model with correlation coefficients 0.69556 and 0.90851, respectively, whereas PCM2 follows the pseudo-second-order kinetic model with correlation coefficient 0.9993. The experimental and calculated values of removal capacity (<i>q</i><sub>e</sub>) at equilibrium is found close to those of the pseudo-second order kinetic model for the removal of both the paracetamol forms PCM1 and PCM2 with the catalyst ZnO nanostructure. The photostability of ZnO sample 2 is also tested with a reusability test in photocatalytic degradation of paracetamol at least four times. The absence of a maxima peak at 243 of PCM1 in the UV/H<sub>2</sub>O<sub>2</sub> reaction system indicates nearly 100% successful conversion of 20 ppm PCM1 by using synthesized catalyst ZnO sample 2. The comparative results of both reaction systems, i.e., UV and UV/H<sub>2</sub>O<sub>2</sub>, show that the hydroxyl radicals, as the active species, are responsible for major degradation of both paracetamol forms (PCM1 and PCM2).</p>","PeriodicalId":3,"journal":{"name":"ACS Applied Electronic Materials","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://pubs.acs.org/doi/epdf/10.1021/acsomega.4c06272","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Electronic Materials","FirstCategoryId":"92","ListUrlMain":"https://pubs.acs.org/doi/10.1021/acsomega.4c06272","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
Abstract
In the present work, a comparative study on eco-friendly synthesis of zinc oxide (ZnO) sample 1 and sample 2 with 3.17 and 4.17 M NaOH, respectively, is reported. Sample 2 with 4.17 M NaOH is applied in the photocatalytic degradation of paracetamol (pure and raw both) using the ultraviolet (UV, 280–400 nm) and UV/H2O2 reaction systems. Pure paracetamol (PCM1) and raw paracetamol (PCM2) from tablets are used for photocatalytic degradation by photocatalysis. Our experimental evidence show that ZnO sample 2 was more active in the UV/H2O2 reaction system than under ultraviolet (UV, 280–400 nm) irradiation only in the photocatalytic degradation process. Field emission scanning electron microscopy (FE-SEM) confirms the homogeneous growth of a rod-like structure for sample 1 and brittle and randomly aggregated rod-like and wire-like nanostructures for sample 2. The peaks observed in the region around 440 to 900 cm–1 in the FTIR spectra for sample 1 and sample 2 annealed at 250 °C confirms the presence of ZnO bonds. UV absorption spectroscopy indicates a red shift in the absorption spectra due to the increase in the molar concentration of NaOH to 4.17 M for sample 2. In this study, the band gap values are found to be 3.33 and 3.01 eV for the synthesized ZnO sample 1 and sample 2, respectively, which are 40 and 360 meV less as compared to that of bulk ZnO (3.37 eV). The oxidation rate is increased in the UV/H2O2 reaction system, producing the highest rate for PCM1 drug removal with rate constant 9.7 × 10–3 min–1 and half-life 71.5 min. The kinetic study results for the removal of PCM1 and PCM2 show good results and follow the pseudo-first-order kinetic model with correlation coefficients 0.69556 and 0.90851, respectively, whereas PCM2 follows the pseudo-second-order kinetic model with correlation coefficient 0.9993. The experimental and calculated values of removal capacity (qe) at equilibrium is found close to those of the pseudo-second order kinetic model for the removal of both the paracetamol forms PCM1 and PCM2 with the catalyst ZnO nanostructure. The photostability of ZnO sample 2 is also tested with a reusability test in photocatalytic degradation of paracetamol at least four times. The absence of a maxima peak at 243 of PCM1 in the UV/H2O2 reaction system indicates nearly 100% successful conversion of 20 ppm PCM1 by using synthesized catalyst ZnO sample 2. The comparative results of both reaction systems, i.e., UV and UV/H2O2, show that the hydroxyl radicals, as the active species, are responsible for major degradation of both paracetamol forms (PCM1 and PCM2).