Influence of operating conditions on heat and mass transfer in PEMFCs with platinum loading random distributions

IF 2.6 3区 工程技术 Q2 ENGINEERING, MECHANICAL
Yi Tong Li, Hang Guo, Hao Chen, Fang Ye
{"title":"Influence of operating conditions on heat and mass transfer in PEMFCs with platinum loading random distributions","authors":"Yi Tong Li,&nbsp;Hang Guo,&nbsp;Hao Chen,&nbsp;Fang Ye","doi":"10.1016/j.ijheatfluidflow.2024.109621","DOIUrl":null,"url":null,"abstract":"<div><div>The catalyst loading random distribution has a divergent effect on heat transfer and electrical property inside fuel cells than the catalyst loading homogeneous distribution, but the effects of different stoichiometric ratios and average platinum loadings on electrical property, heat as well as species transfer in the fuel cell considering catalyst content random setting are still unclear. Hence, the impacts of stoichiometric ratios and average platinum loadings on the electrical property of fuel cell considering catalyst content random distribution are explored in this paper by using a steady state, two-dimensional, two-phase, non-isothermal fuel cell model coupled the catalyst layer agglomerate model considering the multi-scale problem of catalyst layer. Results indicate that stoichiometric ratio and average platinum loading do not influence the effect direction of catalyst content distributed randomly on the output power. However, with the stoichiometric ratio rising, the impact degree of catalyst content distributed randomly on the output power first enhances and then diminishes. When the stoichiometric ratio is 1.3, the power density of uniform random distribution changes the most, decreasing by 3.91 %. As the average platinum loading rises, the impact degree of catalyst content distributed randomly on the output power gradually decreases. The power density of uniform random distribution decreases by 4.93 % when the catalyst content is 0.2 mg/cm<sup>2</sup>. Furthermore, the variation trends of temperature distribution, product and reactant content with stoichiometric ratio and average platinum loading under the platinum loading random distribution condition are consistent with that under the platinum loading homogeneous distribution condition. However, as the stoichiometric ratio rises, the reaction rate distribution becomes more uniform for normal random and homogeneous distributions, but the reaction rate distribution becomes uneven under uniform random distribution.</div></div>","PeriodicalId":335,"journal":{"name":"International Journal of Heat and Fluid Flow","volume":"110 ","pages":"Article 109621"},"PeriodicalIF":2.6000,"publicationDate":"2024-10-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Heat and Fluid Flow","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0142727X24003461","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The catalyst loading random distribution has a divergent effect on heat transfer and electrical property inside fuel cells than the catalyst loading homogeneous distribution, but the effects of different stoichiometric ratios and average platinum loadings on electrical property, heat as well as species transfer in the fuel cell considering catalyst content random setting are still unclear. Hence, the impacts of stoichiometric ratios and average platinum loadings on the electrical property of fuel cell considering catalyst content random distribution are explored in this paper by using a steady state, two-dimensional, two-phase, non-isothermal fuel cell model coupled the catalyst layer agglomerate model considering the multi-scale problem of catalyst layer. Results indicate that stoichiometric ratio and average platinum loading do not influence the effect direction of catalyst content distributed randomly on the output power. However, with the stoichiometric ratio rising, the impact degree of catalyst content distributed randomly on the output power first enhances and then diminishes. When the stoichiometric ratio is 1.3, the power density of uniform random distribution changes the most, decreasing by 3.91 %. As the average platinum loading rises, the impact degree of catalyst content distributed randomly on the output power gradually decreases. The power density of uniform random distribution decreases by 4.93 % when the catalyst content is 0.2 mg/cm2. Furthermore, the variation trends of temperature distribution, product and reactant content with stoichiometric ratio and average platinum loading under the platinum loading random distribution condition are consistent with that under the platinum loading homogeneous distribution condition. However, as the stoichiometric ratio rises, the reaction rate distribution becomes more uniform for normal random and homogeneous distributions, but the reaction rate distribution becomes uneven under uniform random distribution.
铂负载随机分布的 PEMFC 中工作条件对传热和传质的影响
与催化剂负载均匀分布相比,催化剂负载随机分布对燃料电池内部的传热和电性能具有不同的影响,但不同的化学计量比和平均铂负载对催化剂含量随机设置下燃料电池的电性能、热量和物种传递的影响仍不清楚。因此,本文采用稳态、二维、两相、非等温燃料电池模型,结合考虑催化剂层多尺度问题的催化剂层团聚模型,探讨了催化剂含量随机分布情况下,化学计量比和平均铂载量对燃料电池电性能的影响。结果表明,化学计量比和平均铂载量不会影响催化剂含量随机分布对输出功率的影响方向。但是,随着化学计量比的增加,随机分布的催化剂含量对输出功率的影响程度先增大后减小。当化学计量比为 1.3 时,均匀随机分布的功率密度变化最大,下降了 3.91%。随着平均铂负载量的增加,催化剂含量随机分布对输出功率的影响程度逐渐减小。当催化剂含量为 0.2 mg/cm2 时,均匀随机分布的功率密度下降了 4.93%。此外,在铂含量随机分布条件下,温度分布、产物和反应物含量随化学计量比和平均铂含量的变化趋势与铂含量均匀分布条件下一致。然而,随着化学计量比的增加,正常随机分布和均匀分布的反应速率分布变得更加均匀,但在均匀随机分布条件下,反应速率分布变得不均匀。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
International Journal of Heat and Fluid Flow
International Journal of Heat and Fluid Flow 工程技术-工程:机械
CiteScore
5.00
自引率
7.70%
发文量
131
审稿时长
33 days
期刊介绍: The International Journal of Heat and Fluid Flow welcomes high-quality original contributions on experimental, computational, and physical aspects of convective heat transfer and fluid dynamics relevant to engineering or the environment, including multiphase and microscale flows. Papers reporting the application of these disciplines to design and development, with emphasis on new technological fields, are also welcomed. Some of these new fields include microscale electronic and mechanical systems; medical and biological systems; and thermal and flow control in both the internal and external environment.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信