AlCoCrFeNi HEA reinforced Al–Si–Mg alloy composite through hot-press sintering

IF 1.9 4区材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY

Bulletin of Materials Science Pub Date : 2024-10-26 DOI:10.1007/s12034-024-03358-2

Kiran Kumar Garlapati, Subhendu Naskar, Surendra K Martha, Bharat B Panigrahi

引用次数: 0

Abstract

Al–Si-based alloys are widely used in the automobile and aerospace industries, whereas high entropy alloys have emerged with many attractive properties. In this study, AlCoCrFeNi high entropy alloy (HEA) is employed to improve the properties of AlSi10Mg alloy through a metal matrix composite approach. Metal matrix composite powder mixture was sintered at 500°C using a hot press at a pressure of 50 MPa. HEA phase was found to be distributed uniformly. An increase of 20 and 40% in hardness and compressive strength were observed by reinforcing HEA in AlSi10Mg alloy.

查看原文本刊更多论文

通过热压烧结获得的铝钴铬铁镍 HEA 增强铝硅镁合金复合材料

铝硅基合金广泛应用于汽车和航空航天工业，而高熵合金则具有许多诱人的特性。在这项研究中，采用了铝钴铬铁镍高熵合金（HEA），通过金属基复合材料的方法来改善铝硅镁合金的性能。金属基复合粉末混合物在 500°C 的温度下用热压机以 50 兆帕的压力烧结。发现 HEA 相分布均匀。通过在 AlSi10Mg 合金中增强 HEA，硬度和抗压强度分别提高了 20% 和 40%。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Bulletin of Materials Science 工程技术-材料科学：综合

CiteScore

3.40

自引率

5.60%

发文量

209

审稿时长

11.5 months

期刊介绍： The Bulletin of Materials Science is a bi-monthly journal being published by the Indian Academy of Sciences in collaboration with the Materials Research Society of India and the Indian National Science Academy. The journal publishes original research articles, review articles and rapid communications in all areas of materials science. The journal also publishes from time to time important Conference Symposia/ Proceedings which are of interest to materials scientists. It has an International Advisory Editorial Board and an Editorial Committee. The Bulletin accords high importance to the quality of articles published and to keep at a minimum the processing time of papers submitted for publication.