The Development of a Flexible Humidity Sensor Using MWCNT/PVA Thin Films.

Abstract

The exponential demand for real-time monitoring applications has altered the course of sensor development, from sensor electronics miniaturization, e.g., resorting to printing techniques, to low-cost, flexible and functional wearable materials. Humidity sensing has been used in the prevention and diagnosis of medical conditions, as well as in the assessment of physical comfort. This paper presents a resistive flexible humidity sensor composed of silver interdigitated electrodes (IDTs) screen printed onto polyimide film and an active layer of multiwall carbon nanotubes (MWCNT) dispersed in a water-soluble polymer, polyvinyl alcohol (PVA). Different MWCNT/PVA sensor sizes and MWCNT percentages are tested to study their effect on the initial electrical resistance (R_i) values and sensor response at different humidity percentages. The results show that the R_i values decrease with the increase in % MWCNT. The sensor size did not influence the sensor response, while the % MWCNT affected the sensor behavior upon relative humidity (RH) increments. The 1% MWCNT/PVA sensor showed the best response, reaching a relative electrical resistance, ΔR/R₀, of 509% at 99% RH. Comparable with other reported sensors, the produced MWCNT/PVA flexible sensor is simpler, greener and shows a good sensitivity to humidity, being easily incorporated in wearable monitoring applications, from sports to medical fields.