Impact of polarization pulling on optimal spectrometer design for stimulated Brillouin scattering microscopy.

Abstract

Brillouin spectroscopy has become an important tool for mapping the mechanical properties of biological samples. Recently, stimulated Brillouin scattering (SBS) measurements have emerged in this field as a promising technology for lower noise and higher speed measurements. However, further improvements are fundamentally limited by constraints on the optical power level that can be used in biological samples, which effectively caps the gain and signal-to-noise ratio (SNR) of SBS biological measurements. This limitation is compounded by practical limits on the optical probe power due to detector saturation thresholds. As a result, SBS-based measurements in biological samples have provided minimal improvements (in noise and imaging speed) compared with spontaneous Brillouin microscopy, despite the potential advantages of the nonlinear scattering process. Here, we consider how a SBS spectrometer can circumvent this fundamental trade-off in the low-gain regime by leveraging the polarization dependence of the SBS interaction to effectively filter the signal from the background light via the polarization pulling effect. We present an analytic model of the polarization pulling detection scheme and describe the trade-space unique to Brillouin microscopy applications. We show that an optimized receiver design could provide >25× improvement in SNR compared to a standard SBS receiver in most typical experimental conditions. We then experimentally validate this model using optical fiber as a simplified test bed. With our experimental parameters, we find that the polarization pulling scheme provides 100× higher SNR than a standard SBS receiver, enabling 100× faster measurements in the low-gain regime. Finally, we discuss the potential for this proposed spectrometer design to benefit low-gain spectroscopy applications such as Brillouin microscopy by enabling pixel dwell times as short as 10 μs.