Experimental-Modeling Framework for Identifying Defects Responsible for Reliability Issues in 2D FETs.

Abstract

In this work, a self-consistent method is used to identify and describe defects plaguing 300 mm integrated 2D field-effect transistors. This method requires measurements of the transfer characteristic hysteresis combined with physics-based modeling of charge carrier capture and emission processes using technology computer aided design (TCAD) tools. The interconnection of experiments and simulations allows one to thoroughly characterize charge trapping/detrapping by/from defects, depending on their energy position. Once the trap energy distribution is extracted, it is used as input in transient TCAD simulations to reproduce the experimental hysteretic transfer characteristics. Our method is widely applicable to any 2D channel/gate stack combination. Here, it is demonstrated on FAB-integrated devices with AlO_x/HfO₂ gate oxide. A Gaussian-approximated defect band in the AlO_x interlayer centered at a position of about 0.1 eV below the conduction band minimum of WS₂ is obtained. Based on this energy position, it is concluded that aluminum interstitial and oxygen vacancies are the defects giving rise to the observed hysteresis. These defects are detrimental to the stability of the studied devices as they are easily accessible by channel carriers during on-state operation. A prominent hysteresis obtained during measurements is consistent with this conclusion.