Achieving automated and high-precision in situ analysis of the dimensional accuracy and dynamic deformation of 3D-printed surgical templates: an in vitro study.

Abstract

Purpose: To demonstrate the viability of a coordinate-measuring machine (CMM) for the geometric analysis of 3D printed surgical templates.

Methods: The template was designed and modified by adding 18 cylindrical landmarks for CMM test and then classified into five groups according to the slicing software and resins (opaque and transparent): Streamflow-O, Streamflow-T, Shapeware-T, Rayware-T and Polydevs-T (N = 3). Three standing times (0 w, 1 w, and 2 w) were included to observe possible deformation. All the measurements were performed automatically by the CMM through a preset program. The Euclidian distance (dxyz) was regarded as the representation of global dimension accuracy, and displacements in the x-, y-, and z-axes were also calculated.

Results: The average dxyz values of Streamflow-O, Streamflow-T, Shapeware-T, Rayware-T and Polydev-T are 32.6 μm, 31.3 μm, 56.4 μm, 96.4 μm, and 55.3 μm, respectively. Deviations were mainly induced by the upward bending of the free end region (positive direction of the z-axis). Different resins did not have a significant influence on the dimensional accuracy. Moreover, deformation appeared to be negligible after 2 weeks of storage, and the z-axis displacements were only approximately 30 μm at week 1 and 10 μm at week 2.

Conclusions: The deviations of the DLP-printed template are induced mainly by z-axis displacements and are determined by the processing accuracy. After 2 weeks, the dimensional stabilities of these templates are reliable, which is encouraging for clinicians. Moreover, the CMM is preliminarily demonstrated to be a feasible tool for achieving automated geometric analysis of surgical templates.