Yan Liu, Fei Han, Haitao Xia, Zhijian Zhang, Qinan Zhou, Bi Xu, Haochen Shi
{"title":"Characterization of A-site doped PrBaCo2O5+δ perovskites as cathode materials for IT-SOFCs","authors":"Yan Liu, Fei Han, Haitao Xia, Zhijian Zhang, Qinan Zhou, Bi Xu, Haochen Shi","doi":"10.1016/j.ceramint.2024.10.142","DOIUrl":null,"url":null,"abstract":"<div><div>Creating highly efficient and durable cathodes persists as a formidable task in the realm of intermediate temperature solid oxide fuel cells (IT-SOFCs). Hence, we present a double perovskite oxide, Pr<sub>0.6</sub>Sr<sub>0.4</sub>BaCo<sub>2</sub>O<sub>5+δ</sub> (PS<sub>0.4</sub>BC), and its electrocatalytic activity is thoroughly investigated. The XRD test is carried out and a notable transformation in the phase structure is observed upon the introduction of Sr<sup>2+</sup> ions into the PBC matrix. That is, the phase structure of the material changes from double perovskite structure to single perovskite structure. Through the TG and TEC test that the introduction of Sr<sup>2+</sup> ions into the lattice can create additional sites for oxygen vacancy formation and reduce TEC values. Further verify that Sr doping can enhance the concentration of oxygen vacancies of the material. The PS<sub>0.4</sub>BC cathode material exhibits remarkably low polarization resistance, achieving an impressive value of 0.027 Ω cm<sup>2</sup> at an operating temperature of 800 °C. Oxygen partial pressure test shows that as the oxygen partial pressure decreases, there is a notable increase in impedance, particularly evident in the low frequency region of the Nyquist plots. This indicates that the oxygen content has obvious effects on the low-frequency processes. When the oxygen partial pressure exceeds 0.05 atm, the oxygen adsorption-dissociation and diffusion process is the rate-limiting step in the ORR. However, when the oxygen partial pressure is less than 0.05 atm, the formation of lattice oxygen through the combination of oxygen ions and oxygen vacancies processes is the rate-limiting step. Compared PBC cathode material, the more pronounced changes in the high frequency arc of the PS<sub>0.4</sub>BC cathode at the same oxygen content. It shows that Sr doping significantly changes the high frequency process. After doping, the oxygen vacancy concentration increases, which facilitates the occurrence of the charge transfer process at high frequency.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 24","pages":"Pages 52904-52916"},"PeriodicalIF":5.1000,"publicationDate":"2024-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224046546","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
Creating highly efficient and durable cathodes persists as a formidable task in the realm of intermediate temperature solid oxide fuel cells (IT-SOFCs). Hence, we present a double perovskite oxide, Pr0.6Sr0.4BaCo2O5+δ (PS0.4BC), and its electrocatalytic activity is thoroughly investigated. The XRD test is carried out and a notable transformation in the phase structure is observed upon the introduction of Sr2+ ions into the PBC matrix. That is, the phase structure of the material changes from double perovskite structure to single perovskite structure. Through the TG and TEC test that the introduction of Sr2+ ions into the lattice can create additional sites for oxygen vacancy formation and reduce TEC values. Further verify that Sr doping can enhance the concentration of oxygen vacancies of the material. The PS0.4BC cathode material exhibits remarkably low polarization resistance, achieving an impressive value of 0.027 Ω cm2 at an operating temperature of 800 °C. Oxygen partial pressure test shows that as the oxygen partial pressure decreases, there is a notable increase in impedance, particularly evident in the low frequency region of the Nyquist plots. This indicates that the oxygen content has obvious effects on the low-frequency processes. When the oxygen partial pressure exceeds 0.05 atm, the oxygen adsorption-dissociation and diffusion process is the rate-limiting step in the ORR. However, when the oxygen partial pressure is less than 0.05 atm, the formation of lattice oxygen through the combination of oxygen ions and oxygen vacancies processes is the rate-limiting step. Compared PBC cathode material, the more pronounced changes in the high frequency arc of the PS0.4BC cathode at the same oxygen content. It shows that Sr doping significantly changes the high frequency process. After doping, the oxygen vacancy concentration increases, which facilitates the occurrence of the charge transfer process at high frequency.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.