Theoretical and experimental study on the effect of the heat shield on the trough solar cavity receiver in alpine areas

Abstract

The large heat loss of the cavity receiver limits its application in parabolic trough collectors, matching the environmental factors in alpine areas, in this paper, adding a glass cover plate as a heat shield at the aperture of the trough inverted trapezoidal cavity receiver is investigated. To quantify the optimization of the system performance by adding, an analytical study is carried out for the cavity receiver using theoretical calculations of heat transfer and indoor experimental tests, while “thermal uniformity” is introduced as an indicator of the temperature distribution inside the cavity, and further verifies experimentally by the outdoor real-area environment. The findings indicate that adding a heat shield is significantly effective in reducing heat loss in windy areas. At the flow rate of 250 L/h and inlet temperature of 323 K, the maximum experimental heat loss value is significantly reduced by 70.01 % in the range of 1–5 m/s wind speeds compared to the one without a heat shield. When the wind direction is from −60° to 60°, the heat loss inside the cavity is small after adding, forming a stable stratified flow, and the thermal uniformity decreases by only 0.02, indicating that the stability of the temperature field inside the cavity is high. Furthermore, outdoor validation experiments demonstrate a slower change in heat loss rate with adding the heat shield compared to without, the growth rate of the former is close to 1/3 that of the latter, with a maximum suppressed heat loss rate of 23.49 %. This study provides the theoretical basis and data guidance for optimizing cavity receiver performance in alpine areas.