Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors

IF 3.9 3区 环境科学与生态学 Q2 ENGINEERING, CHEMICAL
Felix Reinke, Jörg Meyer, Achim Dittler
{"title":"Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors","authors":"Felix Reinke,&nbsp;Jörg Meyer,&nbsp;Achim Dittler","doi":"10.1016/j.jaerosci.2024.106476","DOIUrl":null,"url":null,"abstract":"<div><div>In addition to the costly laboratory-based particle measurement devices, low-cost particulate matter sensors for ambient air quality measurements can also be employed for the detection of PM in gas cleaning devices. The ability to spatially resolve the actual level of particle number concentration with high temporal resolution within a gas-particle separation process is of significant value for process monitoring and control. The quantitative reliability of the measurement data from low-cost particulate matter sensors remains uncertain when the particle concentrations in the apparatus exceed the upper measurement limit of the sensors, whether temporarily or permanently. This study examines the potential of low-cost particulate matter sensors for in-line particle concentration measurements in gas-particle separation processes. The measurement performance of the low-cost particulate matter sensors is initially examined under idealised conditions in a dust chamber. This is done in order to quantify the deviations of the low-cost particulate matter sensors in comparison to a state-of-the-art precision laboratory high-cost sensor. Subsequently, both sensor types are installed at a wet separator test facility, following the quantification of their respective measurement performances. The low-cost particulate matter sensors are capable of measuring particle number concentration above their specified limit (up to <span><math><mrow><mo>≈</mo><mtext>6.1</mtext><mo>×</mo><mtext>10</mtext><msup><mrow></mrow><mrow><mi>4</mi></mrow></msup><mspace></mspace><mtext>cm</mtext><msup><mrow></mrow><mrow><mi>−3</mi></mrow></msup></mrow></math></span>), depending on the measurement conditions. By applying a 3rd polynomial correction function, obtained from the initial quantification measurement, the low-cost particulate matter sensors are able to reproduce the particle number concentration measured by the high-cost sensor. Furthermore, the low-cost particulate matter sensors are capable of reproducing short-term fluctuations in the particle number concentration.</div></div>","PeriodicalId":14880,"journal":{"name":"Journal of Aerosol Science","volume":"183 ","pages":"Article 106476"},"PeriodicalIF":3.9000,"publicationDate":"2024-10-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Aerosol Science","FirstCategoryId":"93","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0021850224001435","RegionNum":3,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

In addition to the costly laboratory-based particle measurement devices, low-cost particulate matter sensors for ambient air quality measurements can also be employed for the detection of PM in gas cleaning devices. The ability to spatially resolve the actual level of particle number concentration with high temporal resolution within a gas-particle separation process is of significant value for process monitoring and control. The quantitative reliability of the measurement data from low-cost particulate matter sensors remains uncertain when the particle concentrations in the apparatus exceed the upper measurement limit of the sensors, whether temporarily or permanently. This study examines the potential of low-cost particulate matter sensors for in-line particle concentration measurements in gas-particle separation processes. The measurement performance of the low-cost particulate matter sensors is initially examined under idealised conditions in a dust chamber. This is done in order to quantify the deviations of the low-cost particulate matter sensors in comparison to a state-of-the-art precision laboratory high-cost sensor. Subsequently, both sensor types are installed at a wet separator test facility, following the quantification of their respective measurement performances. The low-cost particulate matter sensors are capable of measuring particle number concentration above their specified limit (up to 6.1×104cm−3), depending on the measurement conditions. By applying a 3rd polynomial correction function, obtained from the initial quantification measurement, the low-cost particulate matter sensors are able to reproduce the particle number concentration measured by the high-cost sensor. Furthermore, the low-cost particulate matter sensors are capable of reproducing short-term fluctuations in the particle number concentration.

Abstract Image

利用低成本颗粒物传感器调查气体颗粒物分离过程中在线颗粒物浓度测量的潜力
除了昂贵的实验室颗粒物测量设备外,用于环境空气质量测量的低成本颗粒物传感器也可用于检测气体净化设备中的可吸入颗粒物。在气体-颗粒分离过程中,能够以较高的时间分辨率从空间上解析颗粒数量浓度的实际水平,这对于过程监测和控制具有重要价值。当设备中的颗粒浓度暂时或永久超过传感器的测量上限时,低成本颗粒物传感器测量数据的定量可靠性仍不确定。本研究探讨了低成本颗粒物传感器在气体颗粒分离过程中进行在线颗粒物浓度测量的潜力。低成本颗粒物传感器的测量性能最初是在粉尘室的理想条件下进行检测的。这样做是为了量化低成本颗粒物传感器与最先进的精密实验室高成本传感器之间的偏差。随后,在对两种传感器各自的测量性能进行量化后,将其安装在湿式分离器测试设备上。根据测量条件的不同,低成本颗粒物传感器能够测量超过其规定限值(最高可达 ≈6.1×104cm-3)的颗粒数浓度。通过应用从初始定量测量中获得的三次多项式修正函数,低成本颗粒物传感器能够再现高成本传感器测量的颗粒数浓度。此外,低成本颗粒物传感器还能再现颗粒数浓度的短期波动。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Aerosol Science
Journal of Aerosol Science 环境科学-工程:化工
CiteScore
8.80
自引率
8.90%
发文量
127
审稿时长
35 days
期刊介绍: Founded in 1970, the Journal of Aerosol Science considers itself the prime vehicle for the publication of original work as well as reviews related to fundamental and applied aerosol research, as well as aerosol instrumentation. Its content is directed at scientists working in engineering disciplines, as well as physics, chemistry, and environmental sciences. The editors welcome submissions of papers describing recent experimental, numerical, and theoretical research related to the following topics: 1. Fundamental Aerosol Science. 2. Applied Aerosol Science. 3. Instrumentation & Measurement Methods.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信